Important information on the vacuum safety indicator!
Mode of operation of the Mobeli safet y rocker: The vacuum is permanently monitored.
1
3
5
If the safety rocker indicator moves out faster than usual at the same attachment point, we recommend a thorough
cleaning.
If the rubber discs are extremely overstretched or scratched - they should be replaced. Contact your dealer.
If the safety rocker is still raised after the rocker has been turned and also is still sticking out after the tab has been
pressed, you should attach the handle again.
If the safet y rocker is extended as far as shown in Figs. 3+4, the handle must not be used any further.
Risk of accident!
Full securit y for the specified
maximum user weight.
Fig. 1+2
Attention: The handle must be
reattached immediately!
The vacuum of the handle is
reduced. The handle is no longer
permissible for the maximum user
weight. (Only for your information:
A reduced holding force is still
present.) Fig. 3+ 4
Mobile grab handles - ingeniously simple and safe.
2
4
If a handle is attached to a non-porous dense surface
for a long period, the rubber gets stretched and slightly
curved (Fig. 5).
We therefore recommend that you remove the handle
from the surface approx. every 14 days and leave it
overnight on a flat surface with the rocker arms relaxed
and reattach it the next morning.
When re-attaching it is important to press the rocker
arm firmly to the surface.
Obser ve the instructions overleaf.
Video attach grab handle >
Need help?
Do you have a question about the MOBELI and is the answer not in the manual?
Questions and answers