Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kaller TU 750
Summary of Contents for Kaller TU 750
- Page 1 SERVICE INSTRUCTIONS 8100-2005-05 Gas spring models TU 750 - 10 000 LCF 750 - 7500 TUS 750 - 7500 TUR 10 000 TB 750 - 5000 SL 750 - 5000 HT 750 Charging armature T-handle Charging adapter Valve tools Strömsholmen AB Box 216 573 23 Tranås...
- Page 2 SERVICE INSTRUCTIONS Please Note! To achieve maximum service life, keep the gas spring Actual gas protected from dirt, drawing fluids, and grinding dust. spring design may appear In some models there is a safety plug in the bottom different from of the gas spring.
- Page 3 17) For Guides with Assembly design as shown to Warning! As a precuation before you begin to the right make sure Correct assemble the gas spring, gently place the piston that the outer position rod into the tube. Be careful not to damage the O-ring is in the safety plug in the bottom of the gas spring.
- Page 4 SERVICE INSTRUCTIONS Charging gas We recommend using a replenishing armature with pressure regulator. G 1/8" charging adapter, 3014016. (Order No. 3021298-0120). 23) Check that the bleed valve (P) and the shut-off valve 27) Open the shut off valve (Q) slowly on the armature (Q) are closed (turn in a clockwise direction).
Need help?
Do you have a question about the TU 750 and is the answer not in the manual?
Questions and answers