Table of Contents
Advertisement
9
3
VOICE EDIT
[ес———=—-
==
ЕЕЕ СЕС
m
d
Press VOICE EDIT, and use the
4 and
№ keys to move the
cursor to select one of the 6 jobs. You can also press a numeric
key 1 to 6 whi e pressing JOB to jump to the desired job. To
return to the mode from which you came, press JOB+0.
JOBS
| LEVEL, ACCENT LEVEL
Set normal and accented levels
2 PAN
Set pan position
3 PITCH, PITCH SHIFT
Set normal and shifted pitch
4 POLY
5 DETUNE
6 STEREO EXPAND
Set polyphony ON/OFF
Set amount of detune (for Effect)
Set stereo expand (for Effect) ON/
OFF
Each voice has its own Voice Edit settings. At any time in Voice
Edit mode, press an instrument key to select a voice, and make
settings using the following 6 jobs.
Job 1: VOICE LEVEL
This job sets the level (volume) of the voice (and also the level
produced when the voice is played while pressing ACCENT).
Press VOICE EDIT to obtain the following display.
Level 00—63
Use the +1/YES or -1/NO keys to set the level (00—63). This
level applies to all outputs: Stereo, Phones, and both Individual
outputs. Press the ACCENT key to set the change in level for the
voice when played while the ACCENT key is pressed.
Accent -63 —+63
|
=+10!
EVEL
> 123456
Use the +1/YES or -1/NO Keys to set an Accent level for the
selected voice. The sum of the Accent Level and the Voice Level
is limited by the limits of the Voice Level (00—63). If the sum
of the Voice Level exceeds the maximum Voice Level of 63 or
falls below the minimum Voice Level of 00. a "!" is displayed
after the Accent level.
Job 2: PAN
———O——
This job sets the Pan position of the voice when it is sent to the
stereo and PHONES outputs. Press VOICE EDIT, then JOB +2
to obtain the following display:
Pan position 01—15
АМС) 207
1
» 123456
Use the +1/ҮЕ$ or -1/NO keys to set a Pan position from 1 (far
left) through 8 (center) to 15 (far right) for the selected voice. If
the voice is sent to an individual output, this setting has no effect.
Job 3: PITCH
-1200 «1200 cents
-24 —+24 semitones
|
>PICH
SHIFT=+08!
BD 1 > 123456
Use the +1/YES or -1/NO keys to set a Pitch Shift of -24 to +24
semitones
for the selected voice. For example
in the above
display, +8 semitones (800 cents) will be added to the pitch of the
Bass Drum | when it is played while the PITCH key is pressed.
The sum of the Pitch and the Pitch Shift is limited to one octave
(1200 cents) up or down from the original pitch. If the pitch set
here exceeds the maximum or falls below the minimum, а "!" is
displayed after the Pitch Shift level.
Advertisement
Table of Contents
