Download Print this page

Hitachi AX-C12E(BS) Instruction Manual page 7

Compact hi-fi component system

Hide thumbs Also See for AX-C12E(BS):

DAT, etc.

for

HS-AX15

NOTE: * Make sure that the core part of wire is locked by the terminal after each connection.

* Seithe AM loop antenna away from the sound system, system connector cable and speaker wire.

1. Speaker Connections

Be sure to connect the red wire to © and the black wire to ©. Also be sure to connect the right speaker to [R]

and the left speaker to [L] .

2. Antenna Connections

@)MW/LW (AM) loop antenna (attached): Be sure to connect this antenna and do not disconnect it even

when you use a MW/LW outdoor antenna.

(@)MW/LW (AM) outdoor antenna (optional): Use this antenna when the reception is Rot good enough.

(@)FM outdoor antenna (optional): Be sure to connect this antenna.

3. AUX Connections

Use these terminals when you want to connect an extra sound unit.

4. Power Requirement

To AC 240 V, 50 Hz.

CAUTION: Plug in the set only after all the connections have been completed.

IMPORTANT: Switching on the main power switch (@)

Be sure to set the main power switch [POWER0/Q(}] to [6].

Ax-c15e(bs)