Table of Contents
Advertisement
• This product contains a coin/button cell battery. If the
coin/button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using
the product and keep it away from children.
• If you think batteries might have been swallowed or placed
inside any part of the body, seek immediate medical attention.
12.3
Care of the 3D glasses
• Do not use cleaning chemicals containing alcohol, solvent,
surfactant, or wax, benzene, thinner, mosquito repellent or
lubricant. Using these chemicals can cause discoloration or
cracks.
• Do not expose the 3D glasses to direct sunlight, heat, fire or
water. This may result in a product malfunction or fire.
• Do not drop, bend or apply force to the lenses of the 3D
glasses.
• Use a clean soft cloth (microfiber or cotton flannel) to clean
the lenses to avoid scratching them.
• Never spray cleaner directly onto the 3D glasses. This may
damage the electronics.
12.4
Watch 3D
To experience the best 3D effect while you watch 3D programs:
• Sit at a distance that is at least three times the height of the
TV screen.
• Do not sit more than 20 feet away.
3D switching
The first time a 3D signal is detected, you can set your
preference on how to start 3D in the future.
• To switch to 3D automatically, select Automatic.
• To show a notification first, select Notification only.
• To never switch to 3D, select Never.
You can still change this preference in the Setup menu > TV
settings > 3D > Switch to 3D.
Start 3D
When the TV switches to 3D or when a notification is shown
that 3D is available, put on your 3D glasses.
If the TV cannot detect the 3D signal (the 3D signal tag is
missing), the 3D program is shown as a double image on screen.
To switch to 3D, adjust the 3D settings and select 3D - Side by
side or 3D - Top / bottom according to the double image
positions.
1 - Press .
2 - Select 3D settings > 3D - Side by side or 3D - Top /
bottom, then press OK.
Stop 3D
To stop watching 3D, press , select 3D settings and
select 2D.
3D is switched to 2D when you switch to another channel or
connected device.
2D to 3D conversion
You can convert any 2D program to watch it in 3D.
1 - Press .
2 - Select 3D settings > 2D to 3D conversion.
Adjust the 3D depth
1 - Press and select Setup and press OK.
2 - Select TV settings > 3D > 3D effect.
3 - Select Off (no 3D), Less (less 3D
depth), Auto, Normal (optimal 3D quality), or More (more 3D
depth).
4 - Press , repeatedly if necessary, to close the menu.
To switch off 2D to 3D conversion...
1 - Press .
2 - Select 3D settings > 2D, then press OK.
12.5
Optimal 3D viewing
For an optimal 3D viewing experience, we recommend that you:
• sit at least 3 times the height of the TV screen away from the
TV, but no further than 20 feet away.
• avoid fluorescent lighting (such as TL lighting or certain energy
saving light bulbs which operate on a low frequency) and direct
sunlight as they may interfere with the 3D experience.
34
Advertisement
Table of Contents
