Table of Contents
Advertisement
1�2
Getting started
1�2�1
Set up
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. You do not need
to power off your phone before inserting or removing the SIM card
as this phone can support hot swap.
Before you install or remove the SIM card, use a pin to press the small
cavity until the SIM cassette pops out.
Slot1 support micro-SIM, slot2 support nano-SIM/SD card.
Both SIM1 and SIM2 support 4G/3G/2G.
Charging the battery
Connect the battery charger to your phone and wall socket
respectively, the LED indicator will light while charging.
To reduce power consumption and energy waste, when the
battery is fully charged, disconnect your charger; switch off
Wi-Fi, GPS, Bluetooth or background-running applications
when not in use; reduce the backlight time, etc.
6
Advertisement
Table of Contents
