Table of Contents
Advertisement
Connection Signal
Indicator lamp
(on the left side of the
HDBT OUT port)
Data Signal
Indicator lamp
(on the right side of
the HDBT OUT port)
HDMI IN
IR IN
IR OUT
L/R OUT
SPDIF OUT
RS-232
LAN
5.2 Receiver Panel
DC 24V
Name
Power LED
ARC LED
▪ Illuminate: Transmitter and Receiver are in good connection
status.
▪ Flash: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
▪ Illuminate: HDMI signal with HDCP.
▪ Flash: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI source input.
IR input port for receiving the signal of IR remote.
IR output port for control of source device. This IR output signal
is from IR IN port of receiver.
3.5mm stereo connector for analog audio output.
SPDIF connector for optical audio output.
3-pin Phoenix connector for RS-232 command transmission.
The RS-232 command will pass-through from transmitter to
receiver or receiver to transmitter.
RJ45 connector for connecting Hub or router.
SPIDIF
ARC
HDMI OUT
HDBT IN
Function Description
Red LED is on when the receiver is working.
LED is off when the receiver is on standby.
Green LED is on when ARC function is turned on.
IR IN
IR OUT
5 / 8
SWITCH
TX
RX
RS-232
SPDIF IN
SERVICE
LAN
Advertisement
Table of Contents
