Page 1
HG120 USER MANUAL hygger aquarium biochemical sponge filter ATTENTION: There are two bio sponges in the filter, please take out one of them and use it as a replacement cotton. Only one sponge is left on the filter. Due to the long...
Page 4
Filter Spare sponge Step1. Press the sponge down with your fingers, and then lift the cover. Step2. Two bio sponges are pre-installed in the filter. To use, please remove one.
Page 5
Step3. Remove the sponge. Note: The round hollow tube and bulkheads are one piece; do not separate them to avoid damage. Please do not pull out the round hollow tube Step4. Cover the bulkhead, and install the sponge. Step5. Put on the top cover,connect the oxygen pipe to the intake pipe in the middle and the filter is ready to use.
7. ONE YEAR LIMITED WARRANTY This product MUST be purchased from an authorized hygger reseller. Visit our website for a list of authorized resellers. hygger warrants this product against defects in materials and worksmanship for ONE(1) YEAR from the date of the original retail purchase and is none-transferable.
Page 7
Additionally, products that have been refunded are also not covered under the warranty. If you discover a defect, please contact hygger, who will, at it’s option, repair or replace the product at no charge, provided that you return it during the warranty period.
Need help?
Do you have a question about the HG120 and is the answer not in the manual?
Questions and answers