MACALLY MWATCHSTAND3 - 3-in-1 Apple Watch Charging Nightstand Manual

Introduction

Thank you for purchasing the Macally MWATCHSTAND3. The Macally MWATCHSTAND3 is a stylish and sturdy stand, specially designed to keep your Apple iPhone®, Apple Watch®, AirPods® and charging cables together to help keep your desk/nightstand clean.

Package contents

• MWATCHSTAND3
• Spacer accessories
• Adhesive pads
• Cable organizer
• User's guide

*Charging cables not included

Hardware basics

Important notes

• This product only works with original Apple branded Lightning cables and Apple Watch magnetic chargers.
• Apple iPhone, Watch, AirPods, magnetic charger and Lightning cables are not included.
• The iPhone stand does not work with cases that are equipped with bottom plugs that cover the lightning port of the phone.

Installation instructions

APPLE WATCH

1. Insert the Apple Watch charger into the circle cut-out and push the magnetic charger into place.
   
2. Run the cable through the back charger cut-out and run the cable through the cable channel. Then place the cable plug into the cable opening.
   
3. Connect the Apple Watch magnetic charger to a USB power adapter (not included) and place your Apple Watch on the charger to charge it.
   

AIRPODS

1. Pull the Lightning connector upward from the bottom opening.
   
2. Pull the connector to the right, push it downwards and run the cable through the bottom cable channel.
   
3. Connect the Lightning cable to a USB power adapter (not included) and place your AirPods onto the Lightning connector.
   NOTE: AirPod Pro users that have a "C-to-lightning cable" will need to use the AirPods spacer to help keep it levelled.
   

iPHONE

Note: The spacers included in this package are to help accommodate various case thicknesses. After running the cable place your phone onto the lightning connector and see which spacer best fits your case.

1. Pull the Lightning connector upward from the bottom opening.
   
2. Pull the connector to the right, push it downwards and run the cable through the bottom cable channel.
   
3. Connect the Lightning cable to a USB power adapter (not included) and place your iPhone onto the Lightning connector to charge.
   

ADHESIVE PADS

We've included 4 double sided adhesive pads to help create a firm hold onto your desk/nightstand. To use them simply remove the paper backing of each pad and apply them in-between the arrows located under the stand.

CABLE ORGANIZER

To use the cable organizer simply run the cables through the spiral cable wrap to help keep your cables clean and organized.

Technical support

Please E-mail us at techsupport@macally.com, or call us at 1-909-230-6888 Monday to Friday, 8:30AM to 5:30PM, Pacific Standard Time

FAQ & help - https://help.macally.com/help

Manual and driver download https://us.macally.com/pages/drivers-and-downloads