Daewoo AVS1369 - QI Wireless Charging Alarm Clock Manual

Description of Parts

1. LED Display.
2. LED Night Lamp button.
3. USB Socket.
4. Wireless Charging Pad.
5. Wireless Charging Indicator.
6. + & - buttons
7. M button.
8. LED Night Lamp.
9. USB Type-C Power Input Socket (rear).
10. USB Power Cable.
11. USB C-Type Plug.

Operating Instructions

Powering up your Wireless Charging Alarm Clock

1. Insert the USB C-Type Plug (11) of the USB Power cable (10) into the Type-C Power Input Socket (9) on the rear of the Alarm Clock.
2. Insert the large USB plug on the other end of the USB Power Cable (10) into a suitable USB supply rated between 5 volts 2 amp and 9 volts 1.67A.

Using Your Wireless Charging Alarm Clock

12 or 24 Hour Mode

1. Press the M button (7) twice to toggle between 12-hour or 24-hour mode, the LED Display (1) will flash '12H' or '24H' to confirm the mode selected.

Setting the Time

1. Press the M button (7) briefly once and the minutes will flash. Press the + & - buttons (6) to set the minutes.
2. Press the M button (7) briefly once more. Press the + & - buttons (6) to set the hour.
   Whilst setting the time in 12-hour mode, ensure the AM and PM indicators on the LCD Display (1) light according to the time set.

Setting the Alarm Time

1. Press and hold the M button (7) for 3 seconds and the minutes will flash. Press the + & - buttons (6) to set the alarm minutes.
2. Press the M button (7) briefly. Press the + & - buttons (6) to set the alarm hour.
   Whilst setting the time in 12-hour mode, ensure the AM and PM indicators on the LCD Display (1) light according to the time set.

Setting and Unsetting the Alarm

1. Press and hold the '+' button (6) for 3 seconds to set the alarm. The Alarm icon at the lower centre of the LED Display (1) will light.
2. Press and hold the '-' button (6) for 3 seconds to unset the alarm. The Alarm icon at the lower centre of the LED Display (1) will go out.

Silencing the Alarm

1. After the alarm has sounded simply tap the unit to silence the alarm. The alarm will go into a 5 minute 'snooze' period and the alarm icon will flash - alternatively briefly press the '-' or '+' buttons (6) to cancel the alarm.
2. After the alarm has sounded after the snooze period, tap the unit again to silence the alarm for another 5 minute snooze period and the alarm icon will flash - alternatively briefly press the '-' or '+' buttons (6) to cancel the alarm.

Setting the LCD Display (1) Brightness Level

1. Press the '+' button (6) briefly to increase the brightness the LED Display (1).
2. Press the '-' button (6) briefly to decrease the brightness of the LED Display (1).
   At 7.00AM the LED display (1) will automatically default to maximum brightness, at 6.00PM the display will dim to a lower level and at midnight the display will default to fully dim.

Wireless Charging of your Phone

1. Place your phone on the top of the Charging Pad (4) with the rear of the phone towards the pad.
2. The Wireless Charge Indicator (5) will light blue to show once the phone is fully charged.
   Ensure your phone is compatible with wireless charging in order for it to charge on the unit wirelessly – also do not use the Charging Pad (4) at the same time whilst the USB Socket (3) is being used.

Charging Your Phone using the USB socket (3)

1. Insert a USB charging lead (not supplied) into the USB Socket (3) on the Alarm Clock.
2. Connect the other end of the lead to your phone in the normal manner.
   Only use the USB Charging Socket (3) when the Charging Pad (4) is not being used.

Using the Night Lamp (8)

1. Press the LED Night Lamp button (2) to operate the LED Night Light (8) on the top of the Alarm Clock. Repeated pressing will step through the different brightness levels of the lamp.

Care and Use of your Wireless Alarm Clock

• Always disconnect the Alarm Clock from the USB supply before cleaning.
• Clean outside of the Alarm Clock with a clean damp cloth. Never clean with harsh or abrasive cleaners.
• Do not submerge the Alarm Clock in water or any other liquids.

Technical Specification

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed. These instructions should be saved for future reference:

• Read and familiarise yourself with all operating instructions before using this Alarm Clock.
• Before plugging your unit into the USB supply, visually check that the unit is intact and has not suffered any transit damage.
• Check that the voltage indicated on the data plate corresponds with that of the local network before connecting the appliance to the mains power supply.
• Always use this appliance on a solid, level, non-flammable surface.
• Ensure that there is clearance of at least 100mm (4 Inches) minimum around the Alarm Clock for sufficient ventilation.
• Ensure that the ventilation openings are not covered with items, such as newspapers, table-cloths, curtains, etc.
• No naked flame sources, such as lighted candles, should be placed on the Alarm Clock.
• Do not position the Alarm Clock close to sources of heat such as radiators, heaters, other electronic equipment, etc.
• The Alarm Clock shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
• Do not immerse the Alarm Clock in water or any other liquids.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Children of less than 3 years should be kept away unless continuously supervised.
• Do not use this Alarm Clock outdoors.
• Repairs to electrical appliances should only be performed by qualified personnel. Improper repairs may place the user at serious risk.
• Do not operate this appliance after a malfunction or after being dropped or damaged in any way.
• Do not allow the USB power cable to hang over sharp edges or come in contact with hot surfaces.
• Do not run the USB power cable under carpets, rugs, etc.
• This product is intended for household use only and should not be used for industrial purposes.
• Do not use any accessories or attachments with this product other than those supplied or recommended by supplier.
• Do not use this product for anything other than its intended use.
• Do not push objects into any openings as damage to the product and/or electric shock may occur.

www.esgltd.com