Mass Storage Mode - 8BitMods MemCard PRO2 User Manual

Mass Storage Mode

The MemCard PRO2 can be used as a USB Mass Storage device when connected to a compatible host machine that supports Mass
Storage devices.
This allows you to use the MemCard PRO2 as a simple microSD card reader and transfer files between your computer / device and the
MemCard PRO2 microSD card.
To start the MemCard PRO2 in Mass Storage Mode, hold down the right button and connect a usb cable to your computer or device
and the MemCard PRO2 USB port. Continuer holding until the MemCard PRO2 logo comes up on the display with the text "Mass
Storage Mode" underneath.
You can now let the button go. After a few seconds, your computer or device will recognise the MemCard PRO2 as a Mass Storage
device and a new drive icon should appear on your file browser. You can now use it as a normal microSD card reader to transfer files.
Please note that this feature is not intended to replace your normal microSD card reader. While it is a fully featured mass storage
device, the speed is limited and therefore it is not ideal for transferring large files.
Page 15