¥
'mw BEFORE STARTING THE REPAIRING
REAR PANEL
—
ELECTROLYTIC
CAPACITORS
Setting
*
Connect a low frequency oscillator to the tuner input terminal, and 8-ohm load resistor and AC electronic voltmeter
to the speaker terminal.
Add 1 KHz signal from the low frequency oscillator to the set.
°
Set the sound volume to the maximum point.
Adjustment
Meter range select
Parts to be
to turnon.
(Fig. 5)
to turn on.
R617 (ich)
Range Switch...
X0.1
R618 (Rch)
FL peak
power
meter
Range Switch...
X1
R628 (Rech)
Range Switch...
X0.1
R618 (Rech)