Step 3 SYSteM SetUp BUTTON 1. Unpack the box and confirm all NOVO Smart Bag contents listed are present. 2. Visually check that the grid base is seated in the bag MOdUlE correctly. Install the module by first inserting the button into the hole on top of the bag. Next, raise the bottom of the module onto the grid base vent and push down into place. To remove the module, lift the bottom of the module off the grid base vent and pull out towards you. GrId BASE 3. Press Indicator Button five times to activate Bluetooth mode ® and connect the bag to your smartphone from the app. Flashing blue - Bluetooth mode If not flashing blue, skip ahead to the charging instructions on the next page.
Page 7
sTep 4 pRepaRe FoR FiRsT use InstALL youR CHARGE youR MoDuLE: CARtRIDGE: Plug in your USB-C charger [ step 1 ] and fully charge the module remove insert before use. [ step 2 ] If flashing yellow install cartridge module is charging [ step 3 ] If not flashing yellow - follow app prompts...
Page 8
CONNECT APP HOME SCREEN Support menu Bluetooth menu CyCle info Battery life Cartridge life Bag ConneCtion...
Page 9
connecT app cycle acTion START CYCLE END CYCLE EARLY Select your desired cycle from Select end cycle and wait for our three refresh options. the green light before opening. To manually end a cycle early without the app, press the button two times. Always wait until the light flashes green to open your bag before completion.
Page 11
- module error Hold down button for five seconds to restart module - light will flash white rapidly. if still solid red, please contact us: email: support@dressfresh.com app: from the support menu your is ready for action!
Page 12
2 YEAR WARRANTY TecHnical speciFicaTions...
Need help?
Do you have a question about the NOVO and is the answer not in the manual?
Questions and answers