Olfer CBU-DA-1P Instruction Manual

CBU-DA-1P
Instructions manual
CBU-DA-1P
Instructions manual
Read this manual before installation.
Keep this manual for future reference.
WARNING: Risk of electrical shock, personal injury or death.
This device may only be installed and put into operation by qualified personnel.
Check the information of the devices to be controlled to see if they are compatible.
This device is designed for use in lighting and industrial control.
Do not use this device in equipment where malfunction may cause severe personal injury or threaten human life.
Turn power off before installing the device.
Respect national and applicable installation regulations.
If damage or malfunction should occur during operation, immediately turn power off and send device to the factory
for inspection. Do not open, modify or repair the device. The device does not contain serviceable parts.
Description
CBU-DA-1P is a Casambi to DALI control device. CBU-DA-1P controller uses Bluetooth Low Energy communication to
receive a command signal from the Casambi APP and convert it into DALI commands according to the selected fixture
profile.
CBU-DA-1P has an integrated DALI Bus Power Supply with 100mA guaranteed current, which means that it can control
up to 50 DALI LED drivers. These drivers could be also grouped into DALI groups (up to 8).
There are many Casambi fixture profiles available for CBU-DA-1P that include different control modes: Broadcast,
Short Address, Groups, DT6, DT8, TW, RGBW, XY...
CBU-DA-1P also integrates a dedicated push button input for controlling Casambi devices.
Configuration and control can be done from a mobile phone or tablet using the free CASAMBI APP (available for iOS
and Android).
To access all user guides and documents, consult below URL or scan QR code:
https://www.olfer.com/olfer-cbu-da-1p.html
OLFER EN-V1.0 22 January 2024 1