Advertisement
DO NOT use the ladder as a bridge
DO NOT modify the ladder design
DO NOT move a ladder while standing on it
For outdoor use, use caution to the wind
If a ladder is delivered with stabilizer bars
and these bars should be fixed by the user
before the first use this shall be described on
the ladder and in the user instruction.
Ladder for domestic use
Ladder for professional use
DO NOT step off the side of standing ladder onto
another surface
Open the ladder fully before use
Use the ladder with restraint devices engaged only
Standing ladders shall not be used as a leaning
ladder unless it is designed to do so
DO NOT stand on the top two steps/rungs of a
standing ladder without a platform and a
hand/knee rail
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
2.
Repairs and maintenance shall be carried out by a competent person
and be in accordance with the producer's instructions.
NOTE: A competent person is someone who has the skills to carry out
repairs or maintenance, e.g. by a training by the manufacturer.
For repair and replacement of parts, e.g. feet, if necessary contact the
producer or distributor.
Ladders should be stored in accordance with the producer's
instructions.
Ladders made of or using thermoplastic, thermosetting plastic and
reinforced plastic materials should be stored out of direct sunlight.
LIST OF ITEMS TO BE INSPECTED
For regular inspection, the following items shall be taken into account:
— check that the stiles/legs (uprights) are not bent, bowed, twisted,
dented, cracked, corroded or rotten;
— check that the stiles/legs around the fixing points for other
components are in good condition;
— check that fixings (usually rivets, screws or bolts) are not missing,
loose, or corroded;
— check that rungs/steps are not missing, loose, excessively worn,
corroded or damaged;
— check that the hinges between front and rear sections are not
damaged, loose or corroded;
— check that the locking stays horizontal, back rails and corner braces
are not missing, bent, loose, corroded or damaged;
— check that the rung hooks are not missing, damaged, loose or
corroded and engage properly on the;
Rungs;
— check that guide brackets are not missing, damaged, loose or
corroded and engage properly on the
Mating stile;
— check that ladder feet / end caps are not missing, loose,
excessively worn, corroded or damaged;
— check that the entire ladder is free from contaminants (e.g. dirt,
mud, paint, oil or grease);
— check that locking catches (if fitted) are not damaged or corroded
and function correctly;
— check that the platform (if fitted) has no missing parts or fixings and
is not damaged or corroded.
If any of the above checks cannot be fully satisfied, you should NOT
use the ladder.
For special ladder types, further items identified by the manufacturer
shall be taken into account.
sales@sealey.co.uk
Original Language Version
Any horizontal surface which looks like a
platform on a standing ladder that is not designed
for standing on (e.g. a plastic work tray) shall be
clearly indicated on that surface, (only if
necessary due to design of ladder)
REPAIR, MAINTENANCE, STORAGE
www.sealey.co.uk
Standing Ladders Issue:1 26/07/23
REGISTER YOUR
PURCHASE HERE
Advertisement
