AES 900 Technical Manual

Door control system

Advertisement

Quick Links

AES Door Control System
Page 1
___________________________________________________________________________________
Technical Manual
AES 900 Door Control System
285 Newbury Street
Peabody, Massachusetts 01960 USA
Telephone: 1-978-535-7310
Fax: 1-978-535-7313
www.aes-security.com
Document # 40-0900
Updated November 2014
Rev 3.1
1 1
0 7 1 4
This Document Covers Models
726, 900, 905, 910, 920, 940, 944, 945, 946, 950-6

Advertisement

Table of Contents
loading

Summary of Contents for AES 900

  • Page 1 AES 900 Door Control System 285 Newbury Street Peabody, Massachusetts 01960 USA Telephone: 1-978-535-7310 Fax: 1-978-535-7313 www.aes-security.com Document # 40-0900 Updated November 2014 Rev 3.1 0 7 1 4 This Document Covers Models 726, 900, 905, 910, 920, 940, 944, 945, 946, 950-6...
  • Page 2 All modules fit into a special rack system that allows the security designer to tailor the system to the application. Modules are housed in the AES 900 cabinet, which holds up to 9 modules and fits a standard 19" rack. The system buss structure provides for an unlimited number of modules.
  • Page 3: Installation

    AES Door Control System Page 3 AES 910 EMERGENCY MODULE DESCRIPTION: The 910 Emergency Module provides a complete system lock down at the flip of a switch. It can be used in conjunction with any number of doors connected to 940, 941-M or 945 control modules.
  • Page 4: Status Indicators

    This page is included for reference of previously fielded systems. DESCRIPTION: The AES 920 is a remote display for a walk through metal detector. Its audible and visual indicators work in unison with the indicators on the metal detector. RACK LOCATION: Any Location EXCEPT the first (far left) position...
  • Page 5 AES Door Control System Page 5 AES 940 DOOR CONTROL MODULE DESCRIPTION: Each 940 module controls one (1) door. Each door includes two (2) locks: an emergency/magnetic lock; and an access/strike lock. Both locks must be released for the door to open. Indicators on the module display the status of the emergency/magnetic lock, and the door position (open/closed) as sensed by a contact switch at the door.
  • Page 6 (open/closed) as sensed by a switch contact at the door. APPLICATIONS: The 950-6 is a cost effective solution for applications that do not require the comprehensive system provided by the 900 rack system. TOGGLE SWITCH OPERATION: Down “SECURE”...
  • Page 7: System Components

    Pin #1 of this connector should be wired to the common buss. In some earlier versions of the 900 rack however, Pin #1 has no wire. This wire must be installed for the 945 to operate. A pre-cut adapter wire with connectors has been provided to make the connection from Pin 1 to the common bus.
  • Page 8 Individual, Isolated Fire Control Input A direct, isolated input is provided in the 945 module. It is isolated from other system modules and the 900 system fire buss. It allows a separate fire control to immediately release the lock controlled by the 945...
  • Page 9 AES Door Control System Page 9 945 Module, Continued False Alarm Protection Features Several electronic circuits are included to prevent casual or accidental initiation of functions. The panic release bar must be pushed for at least ½ second to activate the exit delay timer.
  • Page 10 FIRE EXIT COMPONENTS: INTERACTION WITH OTHER SYSTEM COMPONENTS: 910 EMERGENCY LOCK DOWN MODULE The AES 910 Emergency Lock Down module is a standard component on AES 900 Series Door Control Systems. Its impact on the Fire Exit Door Section of the system is discussed here.
  • Page 11 AES Door Control System Page 11...
  • Page 12 AES Door Control System Page 12...
  • Page 13 AES Door Control System Page 13...
  • Page 14 24 V Power Supply with 8 Relays AES 727-HDB 24 V Battery Pack, 12AH, for 727 Power Supply AES 727-RB Relay Card, 4 Relays, for use with AES 780 AES 780 24 V Power Supply, Rack Mount, Order Relays Separately AES 900 Rack Mount Cabinet &...
  • Page 15 AES Corporation (“AES”) warrants to the original purchaser that each AES Product will be free from defects in material and workmanship for one (1) year from date of purchase. At no cost to the original purchaser for parts or labor, AES will repair or replace any AES Product or any, part or parts thereof which are judged defective under the terms of this Warranty.

Table of Contents