Commissioning And Operation - Klarstein AMAZONIA 8 Manual

EN
60

COMMISSIONING AND OPERATION

Starting the washing process
1. Pull out the lower and upper baskets, fill the baskets with dishes and push them
back into the appliance. It is recommended to fill the lower basket before the upper
basket.
2. Add the dishwashing liquid.
3. Plug the power plug into the mains socket. Make sure that the main water tap is
turned on completely.
4. Close the door and press the power button to switch on the appliance.
5. When you have selected a programme, the corresponding indicator light will
illuminate. To start the dishwasher, press the start/pause button.
Changing the programme
A programme can only be changed if the appliance has only been running for a short
time. Otherwise, the dishwashing detergent may have already been released and the
dishwasher may already be full of water. If this is the case, the machine will need to be
reset and the dispenser will need to be refilled with detergent. To reset the dishwasher,
proceed as follows:
1. To pause the washing process, press the start/pause button.
2. To cancel the current programme, press the programme button for more than 3
seconds.
3. Use the programme button to select the desired programme.
4. To start, press the start/pause button and the dishwasher will start.