Table of Contents
Advertisement
We recommend that you keep the packaging and the transit bolts for any movement of the
appliance.
5.4 Positioning and levelling
12
ENGLISH
F
G
x4
6. Remove the three bolts, the hose holders
and plastic spacers by using the spanner
supplied with the appliance.
7. Close the holes with the plastic caps you
find in the user manual bag. Put the smallest
cap F in upper hole and the two bigger caps
G in lower holes.
1. Install the appliance on a flat hard floor.
WARNING!
Make sure that carpets do not stop the air
circulation below the appliance.
Bring the appliance near the furniture
recess before levelling it. For more details,
refer to paragraph "Building in".
2. Loosen or tighten the feet to adjust the level.
A correct adjustment of the appliance level
prevents the vibration, noise and the
movement of the appliance when in
operation.
Advertisement
Table of Contents
