Table of Contents
Advertisement
Options
Set the time by which the selected pro-
gramme has to be finished by.
Use the sensor controls to enter
the hour and confirm your entry by
touching OK.
The hour will be saved and the minute
number block will be highlighted.
Use the sensor controls to enter
the minutes and confirm your entry
by touching OK.
The message
Waiting for SmartStart
appear in the display.
The Start sensor control lights up for a
few minutes.
The selected programme will start auto-
matically as soon as the energy pro-
vider has sent the signal or the latest
possible calculated start time has been
reached.
The time remaining will appear in the
display, the sensor control will go
out and the Start sensor control will
light up.
78
Changing or deleting the timer time
You can change the set time or delete
it.
Touch the sensor control.
Use the sensor controls to select
the previously activated timer func-
tion and confirm your entry with OK.
Use the sensor controls to select
the
Change
confirm with OK.
will
After confirming the
ing OK you can change the time set for
the timer.
After confirming the
ing OK, the duration of the selected
programme will appear in the display.
The sensor control goes out and the
Start sensor control flashes.
You can now start a programme or
switch the dishwasher off.
Switching the dishwasher off while a
timer is running stops the timer.
You can also change the set time or
delete it using the Miele app.
or
Delete
function and
Change
function us-
function us-
Delete
Advertisement
Table of Contents
