ELREHA VPR 5340 Operating Manual

Product description / Application
• Compound control system for cooling plants
Capability for control of 3 Compounds or up to 3
Brine Chiller systems
•
Control of Compressors / VCondensers / Gascooler
and up to 128 networked Cold Storage Controllers
• Heatpump control is also covered
•
TFT-Display for display / operation of all plant data
• Cold Storage Controllers are included in
optimization functions
• Integrated error messaging system
• Integrated 12-Channel annual time switch
•
Communication by Ethernet, E-Mail, USB
Dear customer!
By purchasing a VPR 5340 control system, you have the
new generation of our Compound control system in
hands, which is equipped with modern functions.We
think it is mandantory to make yourself familiar with the
system prior to take it into operation, as the amount of
possible settings may be too much to be overseen at first
sight.
The present document is a short overview which just
covers the general operation and the required technical
data. More detailed info about the parameters and
control functions are provided in a separate
documentation.
If you have any questions, please do not hesitate to
contact us.
In this documentation you will find:
- General instructions for use of the device.
- The structure of the user interface and the screens
and menus.
- Connection diagram and safety instructions.
This document does not contain:
- Tables of all parameters and value ranges.
- Functional descriptions of the controlling
algorithms.
These additional info is covered by separate
documentation.
Please observe safety instructions !
Plase note that the descriptions herein are only valid for
units which are running the above mentioned software
version. The software version is noted on the screen
‚Configuration'.
VPR 5340 5321676-0000e03
Ihr ELREHA Team
How to configure and order a VPR 5340 central unit
When you are planning an application, you will know about the needed
ressources regarding Compressors, Condensation fans or Pumps, or
which messge input signals need to be served. The input and output
signals are assigned dynamically, depending on the configuration of
your application. Therefore you will not see at first glance, which I/O
modules will be needed and how to do the connections. These
information is served by the free Configuration tool VPR53Plan.
How to proceed:
- Get the VPR-Configuration tool VPR53Plan started on your PC. This
- Enter all the basic data of your application into the software: Amounts
- As an output you will get:
Accessories (not included with the central unit)
•
ELEKTRONISCHE REGELUNGEN GMBH
Operating manual
Compound Control central
Program is running on MS-Windows. You may request it from us or
directly download it from our homepage at "www.elreha.de" ==>
Download ==> Software.
of Compressors / Condenser fans, Error message processing,
Pressure transmitters, Temperature probes etc.
1. An overview of all the needed ressources of the VPR-System
2. A terminal listing, which can be used to set up the plant plans
3. A list of needed items,
which serves as the basis for your purchase order.
4. A parameter listing of the most important data
for starting up your application.
Expansion modules
BMO 3011 / BMO 3031
BMR 3001
BMA 3251/ BMA 3206
5321676-0000e03
2024-01-24 tkd/mr
VPR 5340
from Software Version S 03.05.00
Page 1 of 16