Advertisement
|
| FRONT PANEL FACILITIES
* illustration shows model F-202L.
Meipncenr
@
SEeaaEeaea
COCICICICIED
@ POWER (STANDBY/ON) switch
ION se.8.cc%
When set to the ON position, power is supplied and the
unit becomes operational
STANDBY... When set to STANDBY position, the main power flow
is cut and the unit is no longer fully operational. A
minute
flow of power
feeds
the unit to maintain
operation readiness.
Disconnect the power cord from the power outlet
when you do not plan to use the unit for a long period
of time,
NOTE:
* The memory will be backed up so long as the power cord is not
unplugged,
© if the power cord is unplugged, the memory will be retained for
several days.
@ RF ATT button
Set this button to ON when receiving strong FM signals (nearby
stations) to reduce sound distortion.|
indicator lights.
Normally, this button should be set to OFF. This button does not
affect AM reception,
NOTE:
This button's status is preset for each station in station memory.
@ MEMORY button
This button is used to memorize
stations. When
the button is
pressed,
the frequency
indicator
will flash.
To memorize
the
frequency of any station, press STATION CALL button while the
frequency display is flashing.
@ BAND (FM/AM) selector buttons
These are used to select the band of the desired station.
(F-202L U.K. model) AM reception
The bands change alternately each time the button is pressed.
6
<ARB 1428 >>
@® STATION CALL buttons
These are used to preset stations and to recall a already preset
station.
© MPX (multiplex) MODE AUTO/MONO button
Mode changes as follows each time this button is pressed:
c
AUTO
—+ MONO
This button does not affect AM reception.
AUTO:
Depending
on
the
broadcast
station,
STEREO,
or
MONO
is
automaticaily selected,
NOTE;
MONO:
To receive stereo broadcasts in monaural.
"MONO" indicator lights up.
NOTE:
:
This button's status is preset for each station in station memory,
@ TUNING AUTO/MANU (Manual) button
Use to select either the auto tuning made or manual tuning mode for
FM/AM reception,
{When the auto tuning mode is selected, AUTO indicator will now
light.
NOTE for F-202L:
Auto tuning is not possible on the LW band.
® TUNING (~ (down)/ + (up)) buttons
These are used to locate the stations.
Push the "~" button to go to a iower, and the "+" button to go toa
higher frequency.
Advertisement
