Advertisement
Quick Links
Velocity Keypad
AT-VKP-8E
The Atlona AT-VKP-8E is a simple yet powerful 8 button IP-based control system in a wallplate
form factor. The buttons are fully configurable for controls such as display power, input switching,
audio levels, or any other functions supported by system devices. In addition to Ethernet, the
VKP-8E also features RS-232 for control of legacy devices. For enhanced customization, the
VKP-8E incorporates a 2.7" e-ink display that supports multiple pages to dynamically change
icons and text associated with the buttons. LED indicators for each button and a multi-step
LED level indicator provide additional feedback to users. The VKP-8E is designed to mount in
one-gang US junction boxes and comes with both black and white faceplates that attach to the
button panel via magnets. Power over Ethernet (PoE) provides both power and data to the panel
over a single cable. For setup, the VKP-8E uses a revolutionary new configuration platform called
Atlona Cloud. It provides an intuitive interface for mapping control commands, text, and icons to
buttons using the extensive library of Atlona and third-party device drivers. When configuration is
complete, lightweight instructions can either be sent to the VKP-8E directly over the network or
stored in a file for later upload.
Package Contents
1 x AT-VKP-8E
1 x White faceplate
1 x 3-pin Captive Screw Connector
4 x Mounting screws
IMPORTANT: The unit can be set up locally, but the computer used for configuration
must have an external connection.
2 x Face plate screws
1 x Installation Guide
1
Installation Guide
AT-VKP-8E
Advertisement
Related Manuals for Panduit ATLONA AT-VKP-8E
Summary of Contents for Panduit ATLONA AT-VKP-8E
- Page 1 Velocity Keypad AT-VKP-8E The Atlona AT-VKP-8E is a simple yet powerful 8 button IP-based control system in a wallplate form factor. The buttons are fully configurable for controls such as display power, input switching, audio levels, or any other functions supported by system devices. In addition to Ethernet, the VKP-8E also features RS-232 for control of legacy devices.
-
Page 2: Panel Descriptions
Installation Guide AT-VKP-8E Panel Descriptions http://192.168.0.XXX/local Must scan QR with mobile Use share URL function to open on a computer <- IoT Mode Control Buttons Button LEDs Once set up, use the buttons to trigger the These can be set to display multiple control commands. -
Page 3: Mounting Instructions
Installation Guide AT-VKP-8E RS-232 A 3-pin captive screw connector has been included for RS-232. Pin out will be determined by the RS-232 cable and connect as RX (receive), TX (transmit) and (Ground). Mounting Instructions The AT-VKP-8E can be mounted to a 1-gang back box. Select the type of 1-gang back box to use and install into a wall. - Page 4 Installation Guide AT-VKP-8E Thread the Ethernet cable through the mounting plate. Install the mounting plate into the wall, using two of the included mounting screws (4 screws are included, 2 each of different sizes for varied US back boxes) Connect the Ethernet cable to the LAN port (and/or *optional* RS-232 connector) (and RS-232...
- Page 5 Installation Guide AT-VKP-8E Initial VKP Setup The AT-VKP-8E has two modes for set up: Local and IoT (Internet of Things - recommended). No matter which mode is set on the AT-VKP-8E, the computer doing the configuration must be connected to the Internet. NOTE: If the local network is not recognizing or speaking to the unit, ensure that port 443 (https) is enabled.
- Page 6 Installation Guide AT-VKP-8E Both modes will have control configured through https://cloud.atlona.com. To get to the configuration, scan the QR code (when in IoT Mode) on a phone, tablet, etc, type the IP address of the unit listed at the top of the e-ink display (minus /local in Local Mode), click the Open Cloud button when in the local webUI (in local mode), or simply enter https://cloud.atlona.com into a browser.
- Page 7 Installation Guide AT-VKP-8E Sign in with email will require an email and password that has already been set up, if one has not been created, select the Create Account link below the blue button, a new screen will open. Once an email and password has been added, select the Sign up button.
-
Page 8: Warranty
Installation Guide AT-VKP-8E Warranty To view the product warranty, use the following link or QR code: https://atlona.com/warranty/. English Declaration of Conformity The English version can be found under the resources tab at: https://atlona.com/product/at-vkp-8e/. Chinese Declaration of Conformity 中国RoHS合格声明 由SKU列出於: https://atlona.com/about-us/china-rohs/. International atlona.com 408.962.0515...