Advertisement
Quick Links
Advertisement
Related Manuals for NCR R6 Checkpoint 7360-K093
Summary of Contents for NCR R6 Checkpoint 7360-K093
- Page 1 Kit Instructions R6 Checkpoint® Cable 7360-K093 Issue B...
- Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
- Page 3 Revision Record Issue Date Remarks Sep 2016 First issue. Jun 2017 Updated IP PDF template.
-
Page 4: Kit Contents
R6 Checkpoint Cable This kit contains a Checkpoint Cable for the NCR FastLane SelfServ™ Checkout 7360. Kit Contents Cable Routing This section details the guidelines for routing the R6 Checkpoint Cable from the IO Box to the Checkpoint Controller Box for the following configurations: •... - Page 5 7360-K093 R6 Checkpoint Cable Right-hand Configuration 1. Connect the DB9 connector of the R6 Checkpoint Cable to the RS232 B Port of the IO Box. 2. Route the cable as shown and out through the cable pass-through hole of the Core. 3.
- Page 6 7360-K093 R6 Checkpoint Cable Note: Remove the Rubber Cover to access the port on the Checkpoint Controller Box.
- Page 7 7360-K093 R6 Checkpoint Cable Left-hand Configuration 1. Connect the DB9 connector of the R6 Checkpoint Cable to the RS232 B Port of the IO Box. 2. Route the cable to the rear of the Core, then out through the cable pass-through hole on the right side of the Core.
- Page 8 7360-K093 R6 Checkpoint Cable 3. Connect the RJ50 connector of the R6 Checkpoint Cable to the RS232 Port of the Checkpoint Controller Box. Note: Remove the Rubber Cover to access the connector on the Checkpoint Controller Box.