Summary of Contents for Omicron DATALOG X-PRO 2.0
- Page 1 DATALOG X-PRO 2.0 IoT MULTISENSOR WIRELESS DEVICE for LoRaWAN™, Sigfox, and GSM networks Quick Start Guide omicroniot.com June 2023...
- Page 2 Version control The following table contains the record of changes per manual version. Version Date Description 14/03/2023 Format change. Extensive revision and correction of content. Technical background information update. 24/06/2023 Version control implemented. omicroniot.com June 2023...
- Page 3 Read this guide before working with the product. For personal and system safety, and optimal product performance, make sure you thoroughly understand the contents before installing, using, or maintaining this product. If you encounter a problem with your Datalog X-PRO, review the configuration information to verify that your selections are consistent with your application: input configurations;...
- Page 4 Warning notice standard This guide contains notices that must be observed in order to ensure personal safety, prevent damage to properties, and guarantee proper installation, use, and maintenance of the equipment. The notices referring to personal safety or the integrity of the device are highlighted in the guide by an alert symbol;...
-
Page 5: Table Of Contents
Contents Section 1: Introduction 1.1 Product recycling and disposal 1.2 Storage and transport Section 2: Quick Start 2.1 Connection of sensors to the Datalog X-PRO 2.2 Power the Datalog X-PRO 2.2.1 Indoor use: AC/DC adapter connection (Supplied) 2.2.2 Outdoor use: Connection to a solar panel or to an industrial power supply (Not Supplied) 2.3 Turn on the device 2.4 Send data via Sigfox or LoRaWAN Network™... - Page 6 Equipment ratings and certifications are no longer valid on any products that have been damaged or modified without the prior written permission of Omicron IoT Solutions. Any continued use of a product that has been damaged or modified without prior written authorization is at the customer's sole risk and expense.
-
Page 7: Section 1: Introduction
Centriomega® IoT remote monitoring platform. To follow this guide you will need: ● Datalog X-PRO 2.0. ● Magnet (provided by the manufacturer). ● A device enabled for internet navigation (PC, Tablet, Smartphone, etc.). -
Page 8: Section 2: Quick Start
Section 2: Quick Start 2.1 Connection of sensors to the Datalog X-PRO There are more than 60 different sensors that the user can connect to the Datalog X-PRO. One device can receive up to three different sensors communicating with the main unit through their sensor interfaces. -
Page 9: Power The Datalog X-Pro
2.2 Power the Datalog X-PRO Among other hardware and firmware protections, the Datalog X-PRO is protected against power interruptions with its battery; which can supply energy for up to 180 days (depending on the sensors implemented and the data upload period to the remote monitoring platform). Thanks to that, the user can consider using the device without connecting it to a power source in combination with the sensors that allow it, and recharging the battery whenever necessary. -
Page 10: Outdoor Use: Connection To A Solar Panel Or To An Industrial Power Supply (Not Supplied)
2.2.2 Outdoor use: Connection to a solar panel or to an industrial power supply (Not Supplied) Always observe the following safety instructions: ● Connections must be made only in the complete absence of line voltage. ● If over-voltage is expected, surge arresters should be implemented by the user. - Page 11 Figure 2-3 Schematic of Installation of the Datalog X-PRO with a Solar Panel System 2. Follow the guidelines of the solar panel and solar charge controller device manufacturers for their mounting: ● Calculate the total power of the system adding the power of the individual sensors connected to the Datalog X-PRO.
-
Page 12: Turn On The Device
It is recommended to cover the terminal box of the solar panel with a layer of silicone after mounting and connecting it, to ensure its protection against the ingress of water or dust. Remember that the protection elements must be suitably located and easily reachable. Also, said components must be marked as the disconnecting mechanism from an external power source for the monitoring system. -
Page 13: Send Data Via Sigfox Or Lorawan Network
Figure 2-5 Proper position to locate the programming magnet near the Datalog X-PRO 2.4 Send data via Sigfox or LoRaWAN Network™ The publication time configured for each sensor will naturally limit the data transmissions executed by the Datalog X-PRO, however, once the device is turned on, you can force it to send data through the Sigfox network or the LoRaWAN network™, as configured. - Page 14 NOTE: The system should be installed with all peripherals attached, to mount the assembly as a single block. It is strongly recommended to install the antenna so that its axis is vertical with respect to the ground, as this favors the range of the signals transmitted by the device.
- Page 15 Figure 2-7 Main Enclosure Elements To mount the Main Unit on a pole: 1. Find the mounting holes covered by the blind lids at the top and bottom borders of the Main Unit enclosure (3 in Figure 2-7). 2. Attach the pole mounting bracket accessories that come with the delivery to the Main Unit, using the screws provided by the manufacturer.
-
Page 16: Access The Remote Monitoring Platform
2.6 Access the Remote Monitoring Platform To review the data sent to the Remote Monitoring Platform, access iot.omicroning.co (the entry form is displayed below), with the credentials provided by the manufacturer of the Datalog X-PRO or your dealer: Figure 2-9 Remote Monitoring Platform entry form If you don't have login credentials, contact your device dealer or manufacturer. - Page 17 Figure 2-10 Steps to view a specific Dashboard omicroniot.com June 2023...
- Page 18 Global Headquarters America Regional Office Omicron IoT Solutions Address: Carrera 46 # 38 - 62 Off. 502 Medellín - Colombia Phone: +57 (604) 2328381 WhatsApp +57 (317)4365062 comercial@omicroning.co www.omicroniot.com omicroniot.com June 2023...
- Page 19 © 2023 Omicron IoT Solutions. All rights reserved. omicroniot.com June 2023...