Download Print this page

Everwell CP-MBP Manual

Mute box condensate pump

Advertisement

Quick Links

CP-MBP
Mute Box Condensate Pump
Thank you for buying our new condensate pump of MUTE BOX.
This manual gives instructions on the correct installation. Please record the
following information for your future reference.
TECHNICAL DATA
• Power supply :100-240V AC
50/60Hz <4W
• Max.flow:20L/h @ 0 head
• Sound level:<19dB(A) @ 1m
• Max.recommended head:20m
• Max.suction lift:2m
• Max.unit output: 20kw / 68000Btu/h
• Safety switch:3A Normally closed
• L x W x H:147mm x 36.3mm x 34mm
TYPICAL PERFORMANCE
25
20
15
11
8
5
2
0
0
5
10
LITRES PER HOUR
• Max.water temperature:70ºC
• Discharge tube:6mmID
• Class:II appliance
• Rated:continuous
• IP Protection:IPX5
• Thermal protection:
• Fully potted:
• CE marked
15
20
25
30
In the box
2
3c
5
6
Assembled mute box
1
2
6mm i/d vinyl tube
3
Assembled Inline reservoir, including:
lid & sensor cable
3a
float
3b
3c
filter
reservoir
3d
1.5m length of 6mm i/d vinyl tube
4
PRODUCT SAFETY
• CAUTION: The MUTE BOX Pump has
been evaluated for use with water only.
• WARNING: Risk of electric shock. This
pump has not been investigated for use
in swimming pool or marine areas.
• The means for isolation must be
incorporated in the fixed wiring in
accordance with wiring regulations.
• Ensure the pump is disconnected from
the mains supply before carrying out any
adjustments or servicing.
• The supply cord can not be replaced. If the
cord is damaged, this pump must be discarded.
INSTALLATION
1、Ensure float is positioned in
reservoir with magnet
uppermost, the filter is in place
and the lid is clipped firmly onto
reservoir.
35
3a
3b
3d
4
8
Inlet tube
5
2 x self adhesive velcro strips
6
Power cable
7
4 x 200mm x 5mm cable ties
8
*NOTE:
You will need several metres of 9mm
o/d x 6mm i/d vinyl tube.
• Do not run this pump dry.
• Always ensure the metal magnet
in the float is facing upwards.
• Always ensure the reservoir is
sitting flat and horizontal.
• The Pump is ideal for most working
and living environments. It is not
recommended where the environment
is oily or particularly dusty.
• Acceptable for indoor use only.
• Non-submersible pump.
1
7

Advertisement

loading
Need help?

Need help?

Do you have a question about the CP-MBP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Everwell CP-MBP

  • Page 1 In the box CP-MBP Mute Box Condensate Pump Assembled mute box Inlet tube 6mm i/d vinyl tube 2 x self adhesive velcro strips Power cable Assembled Inline reservoir, including: 4 x 200mm x 5mm cable ties lid & sensor cable...
  • Page 2 2、Secure reservoir horizontally using 3、Fit breather tube to 6、Note direction of water flow velcro strips and for the inline reservoir use reservoir lid. the inlet hose to connect firmly to drainage pipe. 7、Push the 9mm o/d x 6mm i/d tube onto the reservoir and the pump. Secure with cableties.