Advertisement
Quick Links
Advertisement
Related Manuals for H3 System H3G-980
Summary of Contents for H3 System H3G-980
- Page 1 LTE tele-health modem Instruction (H3G-980) H3 System Co., Ltd...
- Page 2 < Revision Notes > Date Version Content Author 2017. 3. 21...
-
Page 3: Usa-Federal Communications Commission (Fcc)
USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. -
Page 4: Packaging List
AC Adapter (5V/3A) Overview This document describes instructions regarding the H3 LTE tele-health modem (H3G-980, H3 System) and the related components. This document includes How to install and configure the H3 LTE tele-health modem How to use the H3 LTE tele-health modem... - Page 5 2. LTE tele-health modem installation 1) Preparation for deployment LTE tele-health modem configuration Turn off the LTE tele-health modem. (Figure 1.) Connect a serial cable (provided by H3 System) to a LTE tele-health modem and a PC. iii. Run the configuration software.
- Page 6 Figure 1. Power ON Switch Figure 2. FW Download Console mode Selection 1(Booting) left 3(Download) right...
- Page 7 LTE tele-health modem configuration 1) Components A. A serial cable provided by H3 System B. Configuration software For admin: Serial numbers can be modified. For user: Serial number change is not allowed. 2) Descriptions A. Configuration software for an admin: Serial No. modification is enabled.
- Page 8 3) Steps A. Turn off the LTE tele-health modem. B. Connect a serial cable (provided by H3 System) to a LTE tele-health modem and a C. Run the configuration software. D. Select the suitable COM port (You can check the COM port at the device manager.) and click “Open.”...
- Page 9 3) Network Pairing mode A. Prepare AMC or patient requests BT device pairing with target GW and BT device information. (H3G-980(GW), target Bluetooth(BT) device). AMC confirms the corresponding information and registers the information into AMC’s DB. (btaddress. Serial, Pincode, devtype) AMC can register several BT device.
- Page 10 - AMC instructs the patient to make the BT device be at pairing mode. GW's LED indicates the pairing status. After completion, GW’s LED indicates whether the pairing succeeds or fails. GW automatically updates the pairing results into AMC’s DB through DC AMC checks whether the process is successfully completed through AMC's If register several BT device, AMC has to guide Patient set BT device in pairing mode sequentially,...
- Page 11 Measurement and data transmission 1) How to use A. Take a reading, and then the reading is transmitted to the LTE tele-health modem by Bluetooth. B. And the reading is automatically transmitted to the server via mobile networks. C. At server access failure, it tries 9 more times, in total 10 times at most with 1 hour period until success.
- Page 12 Data collection software 1) Setup A. Default path : C:\Program Files\H3SYSTEM\DataCollection_GPRS\DataCollection_GPRS.exe B. Configuration file name: gprs_config.ini C. Contents of configuration file (gprs_config.ini) LOG_PATH=C:\gprs\log <= Log file path DATA_PATH=C:\gprs\data <= Data XML file path iii. PORT=65001 <= TCP/IP port D. Change of configuration Stop the corresponding windows service Change the configuration file, gprs_config.ini iii.
- Page 13 <?xml version="1.0" encoding="utf-8"?> <Measure serial="1111000002" dc="1" battery="1.2"> <Info servertime="20111221132941" gwtime="20111221132941" sim="310260760561444" fw="H3G- 700 v1.0.28" signal="99,99" /> <Device type="Pressure_AND"> <Data id="5080600120" measuretime="20111109132941" sys="155" dia="98" pul="77" battery="2.63" con_gwtime="20111221132941" con_devtime="20111221132941" /> </Device> <Device type="Weight"> <Data id="2222222201" measuretime="20110901142303" result="068.60" unit="kg" battery="2.3" con_gwtime="20111221132941" con_devtime="20111221132941" /> </Device>...
- Page 14 dc="0" Power Adapter Connection Status ( 0 : Connected ,1 : unconnected) battery="1.2" LTE tele-health modem battery type="glucose" Device - Glucose : Glucometer - Pressure_AND : Blood pressure(AND) - Pressure_IEM : Blood pressure(IEM) - Weight : weight scale(AND) - Thermometer : Thermometer - OXI : Pulse Oximeter id="ZHZ306CBY"...
- Page 15 information gwtime: timestamp of LTE tele-health modem gwtime="20111221132941" during communication between LTE tele- sim="310260760561444" health modem and server fw="H3G-700 v1.0.28" sim: SIM card ID including carrier info signal="99,99" /> fw : LTE tele-health modem firmware version signal: signal strength (format : signal=”rssi, ber”)