LG CineBeam HF60LG Owner's Manual page 10

10
CAUTION
• Do not place heavy objects on the
projector.
- It may fall down and cause
personal injury.
• Be careful not to allow any impact
to the lens during transport.
•
Do not touch the lens of the
projector.
- The lens may be damaged.
• Do not use any sharp tools on
the projector such as a knife or
hammer, because this may damage
the casing.
•
In the event that no image appears
on the screen or no sound is heard,
stop using the projector. Switch
off the projector, unplug it from
the power outlet and contact our
service center.
- This may result in fire or electric
shock.
•
Do not drop anything onto the
projector or allow anything to bang
into the projector.
- This may cause damage to the
projector or personal injury.
• It is recommended that you
maintain a distance of more than
5 to 7 times the diagonal length of
the screen.
- If you watch the screen at a
close distance for a long time,
your eyesight may become
worse.
• Do not block the light beam emitted
from the projector using a book or
other object.
- Lengthy exposure to the
projector beam may result in
fire. In addition, the lens may
be overheated and damaged by
the reflected heat. Disable the
AV function to stop projection
temporarily or turn off the
power.
•
Do not start the projector with the
volume turned up high.
- High volume may damage
hearing.
• If you use headphones or
earphones, do not use them at high
volume or for a long period of time.
(Only applicable to models that
support headphones (earphones).)
- Doing so may damage your
hearing.