Table of Contents
Advertisement
When installing: After the LCD elastic adhesive tapes are removed, they cannot be used anymore. New LCD
elastic adhesive tapes are required for replacement.
Removal steps of the LCD panel (for L15 Gen 1)
1. Grasp the end of three elastic adhesive tapes with tweezers. Pull out each tape slowly in the direction as
shown until three elastic adhesive tapes are all released from LCD unit
Note: Do not pull the tapes too fast, otherwise, the tapes might snap.
2. Turn over the LCD panel
2
and detach the LCD cable from the LCD panel as shown.
1
.
.
Chapter 8
Removing or replacing a FRU
107
Advertisement
Table of Contents
