Gamma 018545 Manual

423518545
UK SRG-00006 / 2017-07
STRIMMER BRUSH CUTTER PETROL
USAGE
The machine is solely intended for cutting long grass, weeds and light undergrowth.
SAFETY REGULATIONS
IMPORTANT!
• Always wear personal safety equipment.
• Users of the machine must ensure that no people or animals come closer than 15 meters
to the machine when operating. If multiple users work in the same workplace, the safety
distance must be at least double the boom length, but always a minimum of 15 meters.
• Execute a general inspection of the machine before using it.
IMPORTANT!
A Strimmer Brush Cutter may be a dangerous tool when used improperly or without due care
and may cause serious or fatal injury for the user or others. It is essential that you read and
understand the contents of this manual.
When using the machine, approved personal protective equipment must be used. Personal
protective equipment does not eliminate the risks, but reduces the harmful effect in case of an
accident.
CAUTION! Machines that are equipped with saw blades or blades for grass cutting can exert
tremendous side way force when the blades come into contact with a solid object. This is called a
backlash. Always keep people and animals at least 15 meters from the machine.
Original instrction manuals and safety regulation are available at Boels Verhuur B.V.
PARTS OVERVIEW
31
18
19
20
1
34
21
27
1 Strimmer blade
2 Refill lubricant
3 Angular transmission
4 Protective guard for cutting tool
5 Shaft
6 Handle
7 Throttle lever
8 Stop switch
9 Throttle lock
10 Bracket for carrier set
11 Cylinder protective cap
12 Starter lever
13 Fuel tank
14 Choke lever
15 Fuel pump
16 Air filter cover
17 Handlebar adjustment
Throttle lock
The throttle lock is designed to prevent accidental throttle activation. When latch (A) is pressed into
the handlebar (= when holding the handlebar), the throttle lever is disengaged (B). When the
handle is released, both throttle lever and throttle lock return to their respective starting positions.
This occurs via two independent spring return systems. This position means that the throttle lever is
automatically locked to idling setting.
3
2
5 17
10
6
22
34
4
4
21
25
26
28
29
24
18 Locking screw
19 Support head
20 Support flange
21 Pick up
22 Trimmer head
23 Sparkplug and cap
24 Blade nut wrench
25 Instruction manual
26 Transportation protection
27 Allen wrench
28 Carburetor screwdriver
29 Locking pin
30 Carrying strap
31 Lock nut
32 Start throttle button
33 Adjustable throttle cable
34 Washer
Stop switch.
The stop switch must be used to turn off
the engine.
Start the engine and check that the engine
switches off when the stop switch is
turned to the stop position.
Protective guard for cutting tool.
The protective guard prevents loose
objects from being thrown in the direction
of the user. The protective guard also
prevents the user from coming into
contact with the cutting tools.
8
32
7 9
33
13 11
23
14
12
16
15
30
1/3