IMPORTANT SAFETY INFORMATION
Do not exceed maximum pressure of
tire. Consult vehicle recommendation
for optimum and safe pressure.
If a problem occurs, have the problem corrected
before further use.
Do not use damaged equipment.
1.
Specifications
Controls
Air Hose
Angled
Dual Head Chuck
UPC 193175526359
Item 58878
Never connect to an air
source that is capable of
exceeding 160 psi.
Range
Air Inlet
Hose
SAVE THESE INSTRUCTIONS
For technical questions, please call 1-888-866-5797.
ANALOG PISTOL GRIP
TIRE INFLATOR
Over pressurizing the tool may cause
bursting, abnormal operation, breakage of the
tool or serious injury to persons. Use only
clean, dry, regulated compressed air at the
rated pressure or within the rated pressure
range as marked on the tool. Always verify
prior to using the tool that the air source
has been adjusted to the rated air pressure
or within the rated air-pressure range.
2.
Never use oxygen, carbon dioxide,
combustible gases or any bottled
gas as an air source for the tool.
Such gases are capable of explosion
and serious injury to persons.
0 – 160 PSI / 0-11 BAR
1/4" NPT female
3/8" ID x 15.7" L
Pressure
Gauge
Bleed
Valve
Trigger
Air Inlet
23k
Page 1
Need help?
Do you have a question about the 58878 and is the answer not in the manual?
Questions and answers