Hoko HK-C024 Quick Start Manual

Monitor arm

Advertisement

Use with products heavier than the rated weights indicated may result in instability causing possible injury.
Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
Safety gear and proper tools must be used. This product should only be installed by professionals.
Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of
purchase for a replacement.
Check that the product is secure and safe to use at regular intervals (at least every three months).
Monitorhalterung / Monitor Arm
Counterbalance Monitor Arm
ERGO-TWO
HOKO ist eine Marke der PonteSino GmbH
www.pontesino.com
WEEE-Reg. Nr. DE 40647673
Model: HK-C024
65105-LDT25-C024-01
Installationsanleitung

INSTALLATION MANUAL

27"
75x75
(2~6.5kg)x2
100x100
MAX
(4.4~14.3lbs)x2
RATED

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HK-C024 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hoko HK-C024

  • Page 1 Counterbalance Monitor Arm purchase for a replacement. Check that the product is secure and safe to use at regular intervals (at least every three months). ERGO-TWO HOKO ist eine Marke der PonteSino GmbH www.pontesino.com WEEE-Reg. Nr. DE 40647673 27" Model: HK-C024...
  • Page 2 M4x12 (x4) M6x8 (x2) B (x1) C (x1) D (x2) M5x12 (x4) 1. Halten Sie den Federarm fest und bitten Sie 1. Firmly hold the two halves of the spring arm D5 (x4) eine weitere Person, den Kabelbinder durch together and have another person cut 0ff the 3mm (x1) (x1) zu schneiden.

Table of Contents