Advertisement
Table of Contents
Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the
instruction manual carefully before proceeding with the installation. Your PowerAid
Throttle Body Spacer was carefully inspected and packaged. Check that no parts are
missing, or were damaged during shipping. If you need any assistance please call 1-
800-858-3333 to speak with a representative in our Customer Service Center before
returning the product.
INTAKE SYSTEMS FOR VEHICLES LISTED ARE 50 STATE
Parts List
AIR-KIT550PA
AIR-KIT550G
AIR-KIT550H
Drilled & Tapped Bolts
Hex Bolt
8mm Flat Washers
91-95 C/K 7.4L
Thank you for selecting AIRAID.
LEGAL. SEE AIRAID.COM FOR CARB STATUS ON EACH
PART FOR A SPECFIC VEHICLE.
Aluminum Plate
Gasket
Hardware
Ask about our Airaid Intake System for
your vehicle. Call for details!
(1)
(2)
(2)
(1)
(3)
1
Tools List
1/2" Socket
Standard Screwdriver
Advertisement
Table of Contents
Summary of Contents for PowerAid 200-550
- Page 1 # 200-550 INSTALLATION INSTRUCTIONS 91-95 C/K 7.4L Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the instruction manual carefully before proceeding with the installation. Your PowerAid Throttle Body Spacer was carefully inspected and packaged. Check that no parts are missing, or were damaged during shipping.
- Page 2 Installation Instructions. Read Me! 1. DISCONNECT NEGATIVE (-) BATTERY CABLE. Remove air cleaner. Using 1/2” socket, remove (3) 5/16” bolts. * Please Note: Some units have bolts that are drilled and tapped for air cleaner mounting studs. 4. It is not necessary to remove the fuel lines. 5.
Need help?
Do you have a question about the 200-550 and is the answer not in the manual?
Questions and answers