Do you have a question about the WOT Series and is the answer not in the manual?
Questions and answers
Summary of Contents for winkler WOT Series
Page 1
Heating jackets, heating mats and insulation jackets Series WOT / WOG / WOQ / WOI / WOB… Winkler AG ▪ Englerstrasse 24 ▪ 69126 Heidelberg ▪ Germany ▪ Tel. +49-6221-3646-0 ▪ sales@winkler.org ▪ www.winkler.org Rev.1.3.2023-07 1 von 10...
Page 2
As a rule, the installation and intended use must be in compliance with the valid regula- tions for electric heating systems (VDE) and the recognized rules of engineering practice (DIN, accident prevention regulations). Winkler AG ▪ Englerstrasse 24 ▪ 69126 Heidelberg ▪ Germany ▪ Tel. +49-6221-3646-0 ▪ sales@winkler.org ▪ www.winkler.org Rev.1.3.2023-07 2 von 10...
The connection from the heat conductor to the cold conductor is established by using nickel sleeves. All connecting leads are made of temperature resistant cable materials with corresponding electrical insulation strength. Winkler AG ▪ Englerstrasse 24 ▪ 69126 Heidelberg ▪ Germany ▪ Tel. +49-6221-3646-0 ▪ sales@winkler.org ▪ www.winkler.org Rev.1.3.2023-07 3 von 10...
Page 4
If version WOG is not provided with protective conductor braiding, the heated object will need to be integrated into the protection measures! Structure heat conducter series WOG Protective braiding Glas silk insulation Heat conducter Winkler AG ▪ Englerstrasse 24 ▪ 69126 Heidelberg ▪ Germany ▪ Tel. +49-6221-3646-0 ▪ sales@winkler.org ▪ www.winkler.org Rev.1.3.2023-07 4 von 10...
The sensor location for the operating temperature can be defined specifically for the cus- tomer or the application. Winkler AG ▪ Englerstrasse 24 ▪ 69126 Heidelberg ▪ Germany ▪ Tel. +49-6221-3646-0 ▪ sales@winkler.org ▪ www.winkler.org Rev.1.3.2023-07 5 von 10...
Is the heater connected to the right controller? If the sensors are confused, the heater can heat until it is destroyed. With the temperature control systems from Winkler, you will have no problems, as they are designed especially for the heaters.
Varying filling level of the medium or temperature sensor / sensors located in the wrong place • Overtemperatures caused by exothermic chemical processes. • As well as changing ambient conditions. Winkler AG ▪ Englerstrasse 24 ▪ 69126 Heidelberg ▪ Germany ▪ Tel. +49-6221-3646-0 ▪ sales@winkler.org ▪ www.winkler.org Rev.1.3.2023-07 7 von 10...
Need help?
Do you have a question about the WOT Series and is the answer not in the manual?
Questions and answers