Doss SoundBox Pro+ Quick Start Manual page 5

5.Indicators
Indicator view
6.Pairing your device via Bluetooth
1.Enable Bluetooth on your device and search for the speaker.
2.Select SoundBox Pro+ on the Bluetooth list.
3.Once paired, you can see the connected status on your device.
• The speaker will auto power off a�er 15 minutes without any media
input. To remove the func�on, please contact <support@dossav.com>
for support.
• The music volume will drop down 15% automa�cally when the speaker
is on low ba�ery.
Having problems connec�ng?
• Make sure that your device is within 1 meter from the speaker.
• Press and hold the Play/Pause bu�on for 5 seconds.
S�ll have problems? Contact DOSS customer service at support
@dossav.com for assistance.
7.Pairing your device via Auxiliary cable
Play via 3.5mm Auxiliary cable(not supplied)
8. Play music from a Micro SD card
Play in download order
Support capacity: 32G or less
Support format: MP3, WAV, WMV
9. How to set up true wireless stereo pairing
• Make sure both speakers didn't connect to any device via Bluetooth, if
they did, please press and hold play/pause bu�on for 5 seconds.
• Turn on both speakers.
• Press and hold the ADD bu�on on one of the speakers for 3s.
• Wai�ng for pairing.
• Once paired successfully, the speaker with the le� led on is the
Primary, the speaker with the right led on is the Secondary.
• Turn on Bluetooth on your device and select DOSS Soundbox Pro+ on
your Bluetooth list.
Indicator state
Rapidly flashing blue
Solid blue
Solid red
Solid green
Solid white
Light off
L(le�) and R(right) rapidly
flashing white alternately
L(le�)/R(right) solid white
Solid red
Primary
OFF
OFF
System state
Bluetooth disconnects
Bluetooth connected
Audio in mode
Micro SD card mode
Power off
Extra bass mode
Cancel extra bass
TWS Pairing
TWS Paired
Charging
Fully charged
Secondary