Advertisement
1x wall lamp 05
* determine the preferred position
of your Tramonto wall lamp 05
* drill 2 connection holes > follow indicated grid
> advised to be installed by a technician
> use the correct plug for the type of wall
> respect the drill diameter indicated
on the plug
* secure the cable at the backside
> depending on the positioning
of the Tramonti wall lamp
the preferred cable outlet point needs
to be xed using a
simple household
tape at the back
side
* activate the remote control
step 01 / activate remote control by
inserting the requested 3 volt battery
type cr2032 (battery not included in
packaging)
step 02 /plug the lamp in
the wall socket ( compatible with
plug type F )
* optional on/of button
(press to dim)
1x set of plugs and screws
( check with a technician if
the plug is appropriate for the type of wall )
www.valerie-objects.com
1x remote control with dim function
( 3 volt battery cr2032 not included )
01
02
100mm
55mm
step 03 / the rst 10 seconds
push from top to down
1 > 2 > 3 on the remote control.
A blinking signal
indicates the lamp is connected
with the remote control.
1.
2.
3.
Advertisement
