Calibration - Blanco CHOICE Icona User Manual

Calibration (quantity dispensed)
The system is optimally pre-configured at the factory. If the dispensed quantities for the 4 processed
water types do not correspond to the quantity selected on the mixer tap, you can use the quantity
calibration routine to optimally re-adjust your system. Use the menu to do so (see page 48).
The adjustment wheel on the mixer tap must not be set to '0' when you start the calibration process. To
perform calibration, you need a measuring beaker with a filling level of at least 500 ml (0.5 litres).
W1 500 appears on
the display for the first
dispensing of 500 ml.
Place the measuring
beaker beneath the out-
let for processed water
types and press on OK
to confirm.
The system dispenses
500 ml again and stops
automatically. Next use
the arrow keys to set the
value which you read on
the measuring beaker
and press OK to confirm.
Your system is optimally set and the dispensed quantities are now the same as those set on the
mixer tap.
56
The system dispenses
500 ml and stops
automatically. Next use
the arrow keys to set the
value which you read on
the measuring beaker
and press OK to confirm.
W3 500 appears on
the display for the third
dispensing of 500 ml
of hot water. Place
the measuring beaker
beneath the outlet for
processed water types
and press on OK to
confirm.
W2 500 appears on the
display for the second
dispensing of 500 ml.
Empty the measuring
beaker and place it
beneath the outlet for
processed water types
again and press on OK
to confirm.
The system dispenses
500 ml and stops
automatically. Next use
the arrow keys to set the
value which you read on
the measuring beaker
and press OK to confirm.