Search - Search To A Frame - Pioneer LD-V6000 User Manual

6) SEARCH - Search to a Frame
CODING
ARGUMENT MNM
(Frame Number) SC
HEX
VAL
F7
EQUIVALENT
RCU BUTTON
SEARCH
DSPLY
MNM
SC
The SEARCH command instructs the player to position the
laser at the frame number given in the argument. If
no frame number is provided; the frame number in the
active register is used. Video is "black" during the
SEARCH; at the end of the SEARCH the target frame image
is displayed in freeze-frame mode. SEARCH activates
the next register, even if there is an argument.
If the player is unable to locate the target frame, it
makes two retries at the next two higher frame numbers.
If these retries are unsuccessful, the SEARCH ends on
a nearby, but indeterminate frame, and the next program
instruction is executed.
Note: During a manual mode search, if the player receives
a mode-control command (for example, PLAY, AUTOSTOP,
STOP, STEP FIR, SCAN FIR, MULTI FIR, PROGRAM, RUN, or
REJECT) the player immediately executes the new command.
Generally, other commands are executed as well. They
do steal some time from the search, however the search
continues.
Example: The command 1500 SEARCH directs the player
to search to frame 1500, stop, and display the image
in freeze-frame.
TP109 Version 2.0
- -25-
April 19'84