Page 1
700IDT In-dash Touchscreen VGA LCD Monitor Owner’s Records The model and serial numbers are located on the rear of the unit. Please record these numbers in the spaces provided below, as well as the dealer name, address, and telephone number. Please refer to these records whenever speaking to your dealer regarding this product.
Page 2
LCD screen, and irregular colored stripes or brightness may appear on the LCD screen. This is not malfunction. (Effective dots: more than 99.999%) NOTE 6: Make sure your monitor has a Xenarc Laser Hologram sticker to validate the authenticity of your monitor.
Touchkit located on your desktop to launch the Touchscreen program for various settings and adjustments. Package contents 1. 7” In-Dash Touch Screen monitor 2. Monitor cable - monitor to VGA (15 pin) and 2 x Composite Video 3. Power cable 4. Cigarette lighter car adaptor 5.
700IDT Overview 1. Front View 4. Select the Rotating Monitor Utility and/or the Shutdown Utility if you want to install them and click on Next to continue. The Rotating Monitor Utility allows you to rotate your display while the Shutdown Utility provides you with one-click shutdown.
Page 5
Connect signal source 1. Connect the 20-PIN connector on the black monitor cable to the back of the 700IDT. Route the cable through the dash to your PC. 2. Connect the D-Sub15 15-PIN VGA connector to your computer’s monitor output.
Page 6
- Connect the power cable with one yellow wire, one red wire, and one black wire to the back of the 700IDT. Connect the Red and Yellow wires together and plug the cigarette lighter adaptor into your car’s cigarette lighter socket.
Page 7
4. Slide the main unit into the sleeve 5. Apply screws (not included) to secure the unit 6. Re-attach the Trim Plate 7. To slide out the In-Dash Monitor, press the front panel firmly towards dashboard (as the direction illustrated) and release. External Buttons, Hot keys description:...
Page 8
Default - Load default setting. AV2 First - Set whether to have monitor switch to Video Input 2 automatically if a signal is present. Good for car reverse monitoring system. Scaler - Set the display mode to 16:9 or 4:3. Set it to 4:3 if your video signal is in 4:3 aspect ratio and you don’t want the display to be stretched out.