Related Manuals for AOVOPRO G63
Summary of Contents for AOVOPRO G63
- Page 1 USER’S MANUAL Model G63 Dual Motor ATTENTION Read and understand this entire manual before riding. Have this manual at reach...
- Page 2 Thank you for purchasing an electric scooter! This electric scooter is an environmentally friendly high-tech product, a new type of transportation tool with excellent shock absorption, portability, flexibility, good riding comfort, high safety and reliability. Please read the user manual carefully to understand its features, technical parameters, safety precautions, after-sales service and proper use and maintenance.
-
Page 3: Table Of Contents
CONTENTS 1. Safety instructions 2. Package contents 3. Components diagram 4. Assembly and set up 5. App control 6. Folding and unfolding 7. Technical parameters 8. Care storage and battery/controller 9. Warranty... -
Page 4: Safety Instructions
1. SAFETY INSTRUCTIONS Please check whether the scooter drives normally before each drive. Do not use if any part is loose or damaged, especially the braking system. 1. Description Please read this manual carefully before using the scooter. Do not use electric scooters in dangerous situations. Do not use where flammable gases, vapors, liquids, dust or fibers may present a fire or explosion hazard. - Page 5 approaching intersections, and be ready to brake at all times. At intersections, corners, doorways, and other complex areas, you need to slow down or stop. Avoid motor vehicles, cyclists or pedestrians. When riding, keep your hands on the handlebars and keep your feet firmly on the scooter.
-
Page 6: Package Contents
2.PACKAGE CONTENTS ATTENTION Check the package contents,please come to your distributor or retailer if anything is missing. It includes the following parts inside the box: Accessories User Manual Screws Spare Tool Charging Adapter Note: The product you receive may not exactly match the contents of the manual Due to different product configurations, the actual product received shall prevail. -
Page 7: Components Diagram
3.COMPONENTS DIAGRAM 1.Components diagram 1. Front disc brake 10. Power button 2. Rear disc brake 11. Bell 3. Front light 12. Dual/single motor switch 4. Folding mechanism 13. Taillight 5. Coded lock 14. Seat mounting hole 6. Battery compartment 15. Charging port (Right & Left) 7. - Page 8 2.Size Please understand that there is a tolerance in the size Thank you for purchasing our electric scooter. This manual contains information of the update product information available at the time of printing. We reserve the rights to make amendments without advance notice and without incurring any subsequent obligation.
-
Page 9: Assembly And Set Up
4.ASSEMBLY AND SET UP 1. Assembly 2.Install the kickstand, align them with the card holes 1.Put down the scooter and make the (below), and secure them using a 5MM hex wrench. scooter stable 3.Loosen the 4 screws on the handlebar 4.Install the headlight, align the screw position of steering valve. - Page 10 2. Digital Display 1. Front light 6.Dual / single motor display 2. Fault display 7. Mileage 3. Gear 8. Speed 4. Bluetooth 9.Mile/KM display 5. Battery level The above functions are not supported by some models, please refer tothe actual product received - Battery Inventory (point 5 in above diagram): There are 5 Leds showing the battery inventory levels - Change speed mode:...
- Page 11 - Turn ON/OFF the scooter: To Turn ON:when the scooter is off,press power button shortly To Turn OFF:when the scooter is on,press power button for 3 seconds - Turn ON/OFF the lights: To turn on/off the lights(front and rear),press power button twice in a row,when the lights are on,display reflect it(1 in the diagram) - Switch KM to Mile: Press power button 3 times in a row to switch kilometers to miles...
- Page 12 - Total mileage display: Press twice motor switch to display total mileage There may be a mileage value display after leaving the factory, this value is the test value. Manufacturers normally use confidential permissions to clear test values after testing. - Adjusting brake disc When the brake is too tight or to loose,use 5mm Allen wrench to loosen the screw on the caliper.
- Page 13 Charging: To maintain optimum performance of the scooter battery, charge the battery for at least 5 hours per month when not in use. Charge the battery only when it is within the specified charging temperature range. Charging time varies depending on the following conditions: a.The battery has stored power, and if the stored power is lower, the charging time will be longer.
- Page 14 Instruction 1) Charge the lithium battery in the temperature range of 0°C to +45°C. 2) Keep charging for 6-8 hours. 3) Only use the dedicated charger to charge your scooter. 4) Local charger AC input voltage (100~240v). 5) Turn off the power before charging. 6) Make sure the charger is connected to the scooter first, then pluggedin.
- Page 15 4.Battery coded lock reset Battery box password lock Factory password: 000 Note: When the battery box is installed in the frame, the combination lock must be unlocked to avoid crushing the internal iron plate a. The password must be set in the unlocked Reset Instructions: state (the factory default setting is 0-0-0) b.
- Page 16 7.Battery removing and mounting instruction Unlock coded lock of battery, pull Hold the handle of battery set up the red buckle, release and lift it up to remove the battery. triangular thread hook When the battery is installed in the After the battery is installed in the frame, first adjust the combination lock frame, fix the triangular hook inside the...
-
Page 17: App Control
5.APP CONTROL App Download The scooter(app version) can be controlled by AOVOPRO after you install it. Please scan the following QR code to download the AOVOPRO smart app. 1. Download AOVOPRO from your application store or by scanning aboveQRcode,then follow the instructions to install. - Page 18 Real time speed shows the current travel speed of the scooter Connected: Press to connect/ disconnect the scooter with Bluetooth settings on your smart device Lock/Unlock: Press to lock the scooter so it cannot be used, press it again to unlock the scooter so it can be used.
- Page 19 Advanced settings page: Accelerated response: Adjust the sensitivity of the accelerator from level 1 up to level 10. Brake response: Adjust the sensitivity of the brake response from level 1 up to level 10. Speed limit value: The speed limit for the scooter can be set on the app for increased safety. The speed limit can be set between 15 km/h - 60 km/h.
-
Page 20: Folding And Unfolding
6. FOLDING AND UNFOUNDING Scooter body folding/unfolding -Fast folding for 3 seconds: Press 1 anti-unhooking in the above figure, hold the 2 wrench , press it down and fold the steering lever down to complete the folding. -Fast folding for 3 seconds: fold the steering rod upwards, hold the wrench 2, pull it upwards and buckle the anti-tripping. - Page 21 Scooter seat install - Put the seat into the bottom seat hole; -Fasten the screw nuts to fix the seat.
-
Page 22: Technical Parameters
48V Dual Motor Battery 48v 20 .8 AH Battery weight About 8.55KG Motor 1200W*2 AOVOPRO APP None-key start + Motor Anti-theft Locking Intelligent System +man-machine Interaction Optional Removable battery set and seat Brake Front & Rear Mechanical brake +EABS 11" Pneumatic Off-road... -
Page 23: Care Storage And Battery/Controller
8. CARE STORAGE AND BATTERY/CONTROLLER 1.Clean and Store Electric Scooter The scooter is designed to be virtually maintenance free, with all parts installed and working properly, the battery charged, and the tires properly inflated for riding. Do not turn on the scooter, monitor or motor. - Page 24 2.Maintenance of Electric Scooter Battery Do not expose the battery to temperatures above 50°C or low temperatures below -20°C (For example, do not place the battery pack in the sun), otherwise it may cause the battery to malfunction, overheat, or even catch fire. For other battery maintenance precautions, see the battery pack nameplate located under the body.
- Page 25 9) Do not submerge batteries and scooters, if you suspect batteries and scooters have been submerged or experienced water intrusion, contact your distributor until you receive further instructions. Storage scooters should be upright and outdoors away from flammable items. Do not try to remove the battery. Do not plug the power cord into the scooter. Failure to follow these instructions could result in electric shock, injury, burns, or fire.
-
Page 26: Warranty
9. WARRANTY Accessories Quality Issues Warranty Period Motor The motor does not work under One year normal use Controller Controller failure under normal use One year Charger Charger failure under normal use One year Lithium battery Battery failure under normal use Half year Dear Customer: Thank you for purchasing our electric scooter! In order to serve you better, please read it... - Page 27 Trademarks and Legal Notes The content and technical specifications in this user manual are valid for printing where permitted. But our company has the right to change and change the technical specification or design. We will not be under any obligation without prior notice. This user manual contains images, function descriptions, and usage instructions for printing.
Need help?
Do you have a question about the G63 and is the answer not in the manual?
Questions and answers
Come faccio a far visualizzare la icona bluetooth sul monopattino es80
To display the Bluetooth icon on the AOVOPRO G63 scooter, turn on the scooter and ensure Bluetooth is enabled on your smart device. Then open the AOVOPRO app. Once the scooter is connected to the app via Bluetooth, the Bluetooth connection indicator (icon) will be shown in the app.
This answer is automatically generated