Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
DESCRIPTION
The ZATRAN is a zone audio transceiver that can be used with one audio/video source. When used
with the ZA8REC or ZAREC (not included), the Zone Audio system can transmit line level audio over
CAT5.
Balanced differential line driver circuits ensure noise-free connections from audio sources located up
to 300 feet away! The ZATRAN's built-in IR interface allows control of the remotely located source,
and works flawlessly with Xantech's IR distribution components and multi-room controllers.
For additional information, refer to the Installation Instructions found with the ZA8REC and ZAKIT.
SPECIFICATIONS
Input Level: 0 to 2.0Vpp
Frequency Response: ±0.5dB 20Hz to 20kHz
THD+N: 0.01%
IR Input/Output Levels: +12V
IR Bandwidth: 100kHz
Wire Requirements: CAT5, or 4 twisted pair 22AWG
Use in conjunction with ZA8REC or ZAREC (not included)
ZATRAN
Zone Audio Transceiver
- 1 -
Advertisement
Summary of Contents for Xantech ZATRAN
-
Page 1: Installation Instructions
INSTALLATION INSTRUCTIONS DESCRIPTION The ZATRAN is a zone audio transceiver that can be used with one audio/video source. When used with the ZA8REC or ZAREC (not included), the Zone Audio system can transmit line level audio over CAT5. Balanced differential line driver circuits ensure noise-free connections from audio sources located up to 300 feet away! The ZATRAN’s built-in IR interface allows control of the remotely located source,... - Page 2 Figure 1 For an audio only application, simply remove the coaxial video between the ZAREC and ZATRAN as well as the video connections to the multi-room controller and source component. This will give the user the ability to add audio only devices such as a portable MP3 player.
- Page 3 INSTALLATION – ZA8REC and a Remotely Located Audio Component Figure 2 shows a typical application where the remotely located source is a CD player or similar audio device. The remotely located source component can be controlled by affixing the 283M mouse emitter (included) onto the IR sensor window.
- Page 4 LIMITED WARRANTY Xantech warrants its products to be free of defects in materials or workmanship. This warranty extends for one year from the date of purchase by the consumer. Any products returned freight prepaid to Xantech and found to be defective by Xantech within the warranty period will be repaired or replaced, at Xantech's option, at no charge.