VEVOR 402B Quick Start Manual

⑧ x 1 ⑨ x 2
Step5
⑩ x 1 ⑪ x 1
Install the mainframe set① and bolt ⑧*1 washer
⑨*2 nut ⑩*1 with the installation tool ⑪ as showed.
11
10
9
9
8
SUBSEQUENT CONSULTATION: READ CAREFULLY
Warning:
*Put the chair stably on a flat floor. *Building the chairs in good condition.
*Stay away from open flames. *Avoid the overload at the chair.
Precautions before assembly:
*Prepare a clean and dry mounting area. *Verify that the product is not damaged.
*Check that none of the pieces are missing.
Maintenance:
*Clean with a soft fabric. *Regularly remove leaves and / or water collected on the canvas.
*Check the seating regularly.
Storage conditions:
*The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Caution with the risks of pinching or cuts during assembly.
The manufacturer declines all responsibility in case of damages due to a bad installation.
Technical Support and E-Warranty Certificate
www.vevor.com/support
Made In China
Step6
④ x 2
install the armrest ④*2 with the mainframe set ①
till the marble is secured
Weight limited
400LBS
55LBS
Technical Support and E-Warranty Certificate www.vevor.com/support
BATH CHAIR
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you
might benefit from buying certain tools with us compared to the major top brands and does not necessarily
mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are
placing an order with us if you are actually saving half in comparison with the top major brands.