Advertisement
2 7. FIXING THE PIANO CASTERS AND INSTALLING
|
THE SYNTHESIZER STAND
FIXING THE PIANO CASTERS
The EP-705M
is provided with holders which keep its casters from rolling.
Always install them as shown in the illustration above.
Note:
The caster holders are stored in the accessory case.
ATTACHING THE SYNTHESIZER STAND
Synthesizer stand
Open up the arms of the synthesizer stand to form an L-shape and insert the
sides with the screw holes into the stand fittings on the back of the electric
piano. Fix with wing bolts.
There are three screw holes on the arms. The choice of hole determines the
angie of the synthesizer stand. There are three different angles to choose
from.
Note:
The synthesizer stand and wing bolts are stored in the accessory case.
_ 8. MIDI
The letters MIDI stand for the Musical Instrument Digital Interface, an interna-
tional standard for connecting drum machines, synthesizers, and other elec-
trical/electronic musical instruments so that they can exchange keyboard and
tone color data. The EP-705M, since it relies on a mechanical sound source—
a hammer hitting a string— can only send keyboard data.
CONNECTION
Since the EP-705M is limited to sending keyboard data, the interface has only
one connector, labelled MIDI OUT. This receptacle accepts the DIN plug on the
MIDI cable.
OUT
> О 9) | MIDI connector
2 29
ЕР-705М
Instrument А
Instrument В
Note:
Тһе receiving instruments must бе assigned channel numbers before
use.
DISABLING THE INTERFACE
To disable the interface and prevent communication, turn on the CH key and
off both of the UPPER апа LOWER keys. The display will change to "— —-" in-
dicating that the interface is not operating. Pressing one of above three keys
enables the interface.
са Ё
Off
Off
d
4
DUAL
SPLIT
LOWER
UPPER
Advertisement
