IMPORTANT INSTRUCTIONS • The device must not be used in completely enclosed environments. If it is to be used, doors and/or windows must be kept open. The user should pay attention to the following. The distance between the air inlet of the appliance and the doors and/or windows must be 10-20 cm. •...
3.INSTRUCTIONS FOR 3.1 REMOTE CONTROL OPERATION 1- ON/OFF When plugged in, the device powers up and is in ready-to-go mode. When this button is pressed, the device starts to work at low speed. Turns off when pressed again. 2- Cold When this button is pressed, the cooling mode is activated.
3.2 CONTROL PANEL 1- ON/OFF When the ON/OFF button is pressed while the plug is plugged in, the device starts to work. When the ON/OFF button is in power-on mode, it maintains the current operating conditions when the device is turned off and on again. In any operating mode, the cooler can be turned off by pressing this button.
4. CLEANING METHODS OPERATION Since the appliance is cooled with water, the water tank, cooling pads and filters should be cleaned to maintain peak performance, especially after one use. dragged on. This cleaning also prevents the formation of bad odors, etc. The appliance must be maintained and cleaned every 2 weeks to prevent these situations and avoid damage caused by contamination.
5. STORAGE INSTRUCTIONS If the appliance is not going to be used for a long time, empty and clean the water in the tank. Make sure cooling pads and other parts are completely dry before packing. Damp packaging can cause bad odours.
6. INSTRUCTIONS FOR USE 1. If the appliance is not going to be used for a long time, please unplug it to avoid electrical failure. 2. Disconnect power supply during cleaning, maintenance and moving. 3. The cooling pads should be placed in the specified places inside the appliance. Otherwise, this will affect the service life and operating performance.
7. TECHNICAL PARAMETERS Flow Voltage Power Water capacityL Dimensions Net weight Sound m3/h Kabel Salon 8000 220 V 875x540x1350 <76 Maestro 50 Hz 8. SCHEMATIC DIAGRAM...
6. INSTRUCTIONS FOR USE Problem Reason Proposed Solution l.Faulty water pump or 1. Check the connection of the motherbo- level sensor ard, the operation of the water pump level. 2. Calcification of the pads 2. The pads and filters need to be cleaned 3.
Maximum repair time: 30 working days Bandero- Brand: Kabel le and serial number Model: Salon Maestro WARRANTY CONDITIONS I) The warranty period begins from the date of delivery of the merchandise and is 2 years. 2) All parts of the merchandise, including all parts, are covered by the warranty.