Page 2
Precautions Please read, keep and follow all safety and use instructions. Important Safety Instructions. 1. Heed all warnings. 2. Do not overload the box to avoid damage to the speakers. 3. Do not use this product near water. If the box is used outdoors, make sure that no humidity can enter the box.
Page 3
CORDOBA 12 A is a self-powered multipurpose systems with 500 W RMS, composed by one woofer of 12" and one compression driver of 1.75". Incorporates a state-of-the-art Class-D amplifier and own DSP of very intuitive use for easy managing and absolute control, ready to plug and play.
Page 4
User guide. First steps. Connect the power cord to the system. Protect it from being walked on or pinched. Connect the signal cable to either XLR, RCA or Jack connectors. Make sure the gain potentiometer on any of the channels is set to minimum before turning on the system.
Page 5
Amplification and DSP. LCD screen. Input A - combo connector. Input B - combo connector. XLR output. General gain control and screen navigation. Input A gain control. Input B gain control. Line / microphone input level switch. On / Off switch. Power cord connector.
Page 6
Screen Menu Navigation. The input signal level its shown by default at the main screen, as well as the general gain, which can be adjusted using the general gain potentiometer (5). To navigate through the menu press the general gain potentiometer (5) and turn it left or right to display the submenus detailed below, to access a specific submenu press the potentiometer once (5).
Technical datasheet. CORDOBA 12 A Power handling 2000 W peak / 1000 W program / 500 W RMS. Max SPL calculation 1m / 122 dB continuous / 125 dB program / 128 dB peak. Frequency range 50 - 18000 Hz. Dispersion angle 90ºx60º.
Need help?
Do you have a question about the CORBODA 12A and is the answer not in the manual?
Questions and answers