Table of Contents
Advertisement
E. LOCAL CONTROL
This mode is used to set whether the sound from the piano's keyboard will be played
or not, and is called the LOCAL CONTROL ON/OFF mode.
Make sure that the piano is in the programming mode.
After turning off the MULT! TIMBRE mode, press the E.PIANO button.
The flashing LED will change from PIANO 2 to E.PIANO.
Press the highest white or black key to turn LOCAL CONTROL on or off.
OFF
ON
White key (ON) _ : The piano will output sound when the keys are struck.
Black key (OFF)
: Sound will be output only when MIDI data is received, and not
when the keyboard is played.
%* You can also turn this on by turning the power off and then on again,
instead of using the highest key as described above.
Press the CHORUS button to leave the programming mode.
F. One Touch Local Control OFF
The followings are a shortcut method to turn the Local Control OFF.
Turn the power switch on while holding down the 3 reverb buttons.
While holding down
Power ON
Local control has been set to off.
— 38 -
Advertisement
Table of Contents
