Advertisement
Main Unit Preparation
• The following must be completed before operating.
(A battery is already loaded in the main unit when purchased.)
o
Setting the distance scale
Press all three buttons simultaneously (AC button, mode button and start/stop button) to clear alt data. All displays
will illuminate for 2 seconds. Then mile/h alone will be displayed as illustrated in Fig. t. Km/h and mi!e/h are
alternately displayed each time the start/stop button is pressed. Select either as desired. Next, press the mode
button, and the distance scale will be set and displayed as shown in Fig. 2.
* How to replace the battery
Turn the main unit over, remove ttie battery case cover using coin or similar opener as illustrated in Fig, 3, and
insert a new lithium battery (CR 2032), Positioning the (+) pole upward as illustrated, place the battery properly
into the case and close the cover securely,
Advertisement
