Download Print this page

FEND One Owner's Manual

Model: FEND One

Complies with US CPSC Safety Standard for Bicycle Helmets for persons age 5 and

older. This helmet is designed to protect impact caused by collision of head with an

obstacle while cycling or roller skating, it has passed EN1078:2012+A1:2012 to show

conformity to the EHSR of Regulation (EU) 2016/425.

Table of Contents

Need help?

Do you have a question about the One and is the answer not in the manual?

Page 1 Model: FEND One Complies with US CPSC Safety Standard for Bicycle Helmets for persons age 5 and older. This helmet is designed to protect impact caused by collision of head with an obstacle while cycling or roller skating, it has passed EN1078:2012+A1:2012 to show...
Page 2 Once a helmet has received an impact, it may no longer be adequate to protect the head against further impacts and should be discarded and replaced even if damages are not visible. FEND generally recommends replacing a helmet every three years.
Page 3 OWNER’S MANUAL To FOLD helmet, lift arrow on lock tab ( ) up AND rotate side inward, as shown in Figure B. Repeat on opposite side. FOLD LIFT FIT GUIDE To ensure the helmet will provide the maximum protection, make sure it ﬁts correctly and is worn properly.
Page 4 OWNER’S MANUAL STRAP FIT Fasten buckle securely under chin, as shown in Figure D. Pull strap tight for a customized ﬁt. Make sure straps do not cover the ears, as shown in Figure E. Check all adjustments each time before use. REAR FIT ADJUSTER Rotate rear dial clockwise to tighten and counterclockwise to loosen as shown in Figure F.
Page 5 If your FEND helmet is found to be defective in materials or production within one year from the original date of purchase, contact your dealer or FEND, who will at their discretion either repair or replace the helmet. FEND does not guarantee any helmet that is damaged due to heat or contact with solvents.
Page 6 www.fend.io...