Page 1
At the heart of the kitchen Built-In Coffee Machine LAM9100 l Please read the Installation Manual to ensure safe fitting and use of the appliance. l The appliance should be fitted by a suitably competent and qualified person. l Please keep these instructions in a safe place for future reference.
/ water tank and be level competent person before installing LAMONA Check for visual damage. If damaged, do not use. See guarantee: What to do if you need to report a problem. Throughout this manual the following warning symbols are used.
Socket outlet and plug must be of the same type. If in any doubt, please have the wiring system of the building tested by a qualified electrician. LAMONA cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).
Caring for the environment Disposal of the packing material The environmentally friendly, recyclable packaging is designed to protect the appliance from damage during transportation. All packaging materials should be recycled. Recycling reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites. Packaging of this appliance is recyclable and may include •...
Installation Considerations Safe operating temperatures This appliance is designed to work at temperatures between 10 - 35°C. DO NOT install in rooms where temperatures may reach 4°C or lower. The appliance may be damaged if the water freezes. Higher ambient room temperatures offer better product performance.
Dimensions and minimum clearances External dimensions 411mm 30mm 450mm (411+30) 593.5mm 411mm Minimum cabinet aperture Please check these minimum distances. These are necessary for correct installation of the appliance. 50mm (min.) 450mm 75mm (min.) 550mm 560mm Exclusive to Howdens...
Fixing the coffee machine to the runners Extend both rails to their full extent (A). Lower the appliance (B) onto the locating pins ensuring the pins insert correctly into the housing. 4x Locating pins If the height of the appliance requires adjusting use one or more 1mm spacer discs (x8) until the correct height is achieved.
Final alignment • Adjust adjacent appliances as necessary to achieve correct alignment. • Add or remove 1mm spacers to the coffee machine as required. Connect the plug to a c orre ctly earthed power socket. The coffee machine is now installed. Please refer to the user manual for initial set-up and use.
Page 12
Product serial number (Place sticker here) REPRISE À DÉPOSER À DÉPOSER À LA LIVRAISON EN MAGASIN EN DÉCHÈTERIE Cet appareil se recycle Points de collecte sur www.quefairedemesdechets.fr Privilégiez la répara�on ou le don de votre appareil! Product information correct at the time of publication in April 2021. The company has a policy of continuous product development and Howden Joinery Ltd.