Table of Contents
Advertisement
HOME
Mounting Your XACT Visor Sirius Satellite Radio at Home
Find an appropriate location near your stereo receiver to install your plug and play XACT Visor Satellite
Radio Receiver.
INSTALLATION
NOTE!
Use only the appropriate XACT accessories or input devices with your receiver. Use only the Home AC
Adapter that is provided with the kit. It is important that you do not modify it in any way since this will result
in damaging your equipment and void the warranty.
1. Slide the XACT Visor
Sirius Satellite Radio
Receiver onto the mounting
tab of the Visor Vehicle
Mount until it locks into
place. (figure 1). To
remove the XACT Visor
Sirius Satellite Radio
Receiver, push the locking
tab on the bottom of the
XACT Visor Sirius Satellite
Radio Receiver inward and
slide forward.
2. Place the Visor Home Mount
in an appropriate location on
a table, desk, shelf, etc...
(figure 2).
3. Connect the DC Power,
antenna and audio (if
required) to the appropriate
jacks. (figure 3).
KIT
1.
2.
3.
5
Advertisement
Table of Contents
