Table of Contents
Advertisement
Speaker Assembly
Leaving screws inside the device may damage internal components, such as the
battery. When assembling, be extra careful not to leave any unassembled screws
inside the device.
The speaker and receiver are already pre-installed in the rear bracket (bottom
speaker) and the screen module (top receiver). Disassemble the speaker and
receiver only if the speaker and receiver modules themselves require repair.
1
Remove the clear film from the top receiver and assemble it to the exact position of
the screen module using your fingers or the tweezers.
Be careful not to damage the receiver and near components.
2
Press the top receiver with your fingers softly so that the receiver can be assembled
well.
Be careful not to damage the receiver and near components.
Disassembly and Assembly
103
Advertisement
Table of Contents
